| GPS mark is not displayed.
|
Proceed to "GPS Mark is not Displayed"
|
( )
|
| Navigation antenna assembly (w/o Roof Antenna)
|
( )
|
| Telephone antenna assembly (w/ Roof Antenna)
|
( )
|
| Multi-media module receiver assembly
|
( )
|
| Vehicle position mark deviates from correct position and does not return to correct position.
|
Proceed to "GPS Mark is not Displayed"
|
( )
|
| Navigation antenna assembly (w/o Roof Antenna)
|
( )
|
| Telephone antenna assembly (w/ Roof Antenna)
|
( )
|
| Multi-media module receiver assembly
|
( )
|
| Cursor or map rotates when vehicle is stopped.
|
Proceed to "Cursor or Map Rotates when Vehicle Stopped"
|
( )
|
| Multi-media module receiver assembly
|
( )
|
| Vehicle position mark moves in the opposite direction to the vehicle.
|
Check if the GPS mark is displayed on the map screen.
|
-
|
| Proceed to "Cursor or Map Rotates when Vehicle Stopped"
|
( )
|
| Multi-media module receiver assembly
|
( )
|
| Vehicle position mark deviates from and returns to correct position repeatedly even though GPS mark is displayed.
|
Proceed to "GPS Mark is not Displayed"
|
( )
|
| Drive the vehicle for sensor learning. (At a place where GPS signals can be received, drive the vehicle clockwise and counterclockwise in at least a 200 meter square 2 times or more.)
|
-
|
| Navigation antenna assembly (w/o Roof Antenna)
|
( )
|
| Telephone antenna assembly (w/ Roof Antenna)
|
( )
|
| Multi-media module receiver assembly
|
( )
|
| Vehicle position mark moves slow or fast.
|
Proceed to "GPS Mark is not Displayed"
|
( )
|
| Navigation antenna assembly (w/o Roof Antenna)
|
( )
|
| Telephone antenna assembly (w/ Roof Antenna)
|
( )
|
| Multi-media module receiver assembly
|
( )
|
| Voice guidance does not function.
|
Proceed to "Voice Guidance does not Function"
|
( )
|
| Proceed to "Speaker Circuit"
|
( )
|
| Multi-media module receiver assembly
|
( )
|
| Stereo component amplifier assembly
|
( )
|
| Map display is incomplete.
|
Hard disc
|
( )
|
| Multi-media module receiver assembly
|
( )
|
| Route cannot be calculated.
|
Proceed to "Route cannot be Calculated"
|
( )
|
| Multi-media module receiver assembly
|
( )
|
| Screen does not change to night screen even when tail switch is turned on.
|
Proceed to "Display does not Dim when Light Control Switch is Turned ON"
|
( )
|
| Proceed to "Illumination Circuit" Multi-display
|
( )
|
| Multi-media module receiver assembly
|
( )
|
| Navigation ECU cannot record memory point registration or each item setting.
|
Hard disc
|
( )
|
| Multi-media module receiver assembly
|
( )
|
| A message indicating to wait for a while because of low temperature is displayed.
|
Start the engine and increase cabin temperature (near multi-media module receiver assembly)
|
-
|
| Proceed to "Check Hard Disk Drive" in Operation Check
|
( )
|
| Multi-media module receiver assembly
|
( )
|
| A message is displayed because map data cannot be read, and current position screen is not displayed.
|
If message appears only when driving on rough roads, check if message disappears when vehicle is stopped.
|
-
|
| Hard disc
|
( )
|
| Multi-media module receiver assembly
|
( )
|
| Map screen turns white or blue. (GPS receiving status is displayed normally, and switches and own vehicle position mark are also displayed normally.)
|
Change map scale to smallest (a scale that shows a large area)
|
-
|
| Hard disc
|
( )
|
| Multi-media module receiver assembly
|
( )
|
| Voice menu screen is not displayed.
|
Proceed to "Panel Switches do not Function"
|
( )
|
| Proceed to "Steering Pad Switch Circuit"
|
( )
|
| Multi-media module receiver assembly
|
( )
|
| Voice is not recognized.
|
Proceed to "Panel Switches do not Function"
|
( )
|
| Proceed to "Steering Pad Switch Circuit"
|
( )
|
| Proceed to "Voice is not Recognized"
|
( )
|
| Proceed to "Microphone Circuit between Microphone and Radio Receiver"
|
( )
|
| Multi-media module receiver assembly
|
( )
|
| Customizable parameters cannot be changed. (Customizable parameters can be changed by using the intelligent tester.)
|
Multi-media module receiver assembly
|
( )
|
| Reverse signal does not change in vehicle signal check mode.
|
Check shift indicator display on combination meter.
|
-
|
| Multi-media module receiver assembly
|
( )
|
| Parking brake signal does not change in vehicle signal check mode.
|
Proceed to "Parking Brake Switch Circuit"
|
( )
|
| Multi-media module receiver assembly
|
( )
|
| "AUX" is not displayed on system check mode screen.
|
Proceed to "Sound Signal Circuit between Radio Receiver and Stereo Jack Adapter"
|
( )
|
| Multi-media module receiver assembly
|
( )
|