This DTC is stored when the hard disk drive (HDD), which is built into the multi-media module receiver assembly, has an initialization malfunction or read/write errors occur more than a specified number of times.
| DTC Code | DTC Detection Condition | Trouble Area |
|---|---|---|
| B15B8 | Hard Disk Drive (HDD) malfunction | ·
Hard disc drive (HDD) ·
Multi-media module receiver assembly |
Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Precaution for Navigation System (See page Audio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>NAVIGATION SYSTEM>PRECAUTION).
Enter the "HDD Check" screen. Refer to Check Hard Disk Drive (HDD) in Operation Check (See page Audio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>NAVIGATION SYSTEM>OPERATION CHECK).
Select "HDD Check" and check the result.
"OK" is displayed.
After "HDD Check" is selected, it may take a while until the result is displayed.
OK
NG
Clear the DTCs (See page Audio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>NAVIGATION SYSTEM>DTC CHECK / CLEAR).
NEXT
Recheck for DTCs and check if the same DTC is output again (See page Audio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>NAVIGATION SYSTEM>DTC CHECK / CLEAR).
No DTCs are output.
The hard disk drive (HDD) may be malfunctioning even if DTC B15B8 is not output.
OK
(See pageGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING)
NG
Replace the Hard disc drive (HDD) with a new or normally functioning one (See page Audio / Visual / Telematics>AUDIO / VIDEO>HARD DISK DRIVE>REMOVAL).
NEXT
Clear the DTCs (See page Audio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>NAVIGATION SYSTEM>DTC CHECK / CLEAR).
NEXT
Recheck for DTCs and check if the same DTC is output again (See page Audio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>NAVIGATION SYSTEM>DTC CHECK / CLEAR).
No DTCs are output.
OK
NG