Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM › from 2015.08
RM2660E _56 Audio / Visual / Telematics _052829 NAVIGATION / MULTI INFO DISPLAY _0255494 NAVIGATION SYSTEM C

NAVIGATION / MULTI INFO DISPLAY  NAVIGATION SYSTEM  B15F6  Main Body ECU Vehicle Information Reading/Writing Process Malfunction  


DESCRIPTION

This DTC is stored when items controlled by the main body ECU (multiplex network body ECU) cannot be customized via the navigation system vehicle customization screen.

HINT:
The main body ECU (multiplex network body ECU) controls the items for the following systems that are customizable via the multi-display assembly screen:
·

Power door lock control system

·

Wireless door lock control system

·

Lighting system



DTC Code DTC Detection Condition Trouble Area
B15F6 Main body ECU (multiplex network body ECU) vehicle setting processing error.
·

CAN communication system

·

Power door lock control system

·

Wireless door lock control system

·

Lighting system

·

Main body ECU (multiplex network body ECU)

·

Multi-media module receiver assembly



CAUTION / NOTICE / HINT

NOTICE:

Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Precaution for Navigation System (See page Audio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>NAVIGATION SYSTEM>PRECAUTION).


PROCEDURE

1.CHECK CAN COMMUNICATION SYSTEM
a.

Use the GTS to check if the CAN communication system is functioning normally.


OK:

CAN communication DTCs are not output.


Result
Result Proceed to
OK A
NG (for LHD) B
NG (for RHD) C



A

2.CHECK POWER DOOR LOCK CONTROL SYSTEM

B

C

2.CHECK POWER DOOR LOCK CONTROL SYSTEM
a.

Check if the power door lock control system is malfunctioning (See page Vehicle Interior>DOOR LOCK>POWER DOOR LOCK CONTROL SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING).

HINT:

Customization may not be possible depending on the malfunction in the power door lock control system.


OK:

No malfunctions are present in the power door lock control system.




OK

3.CHECK WIRELESS DOOR LOCK CONTROL SYSTEM

NG

3.CHECK WIRELESS DOOR LOCK CONTROL SYSTEM
a.

Check if the wireless door lock control system is malfunctioning (See page Vehicle Interior>DOOR LOCK>WIRELESS DOOR LOCK CONTROL SYSTEM(w/ Entry and Start System)>HOW TO PROCEED WITH TROUBLESHOOTING).

HINT:

Customization may not be possible depending on the malfunction in the wireless door lock control system.


OK:

No malfunctions are present in the wireless door lock control system.




OK

4.CHECK LIGHTING SYSTEM

NG

4.CHECK LIGHTING SYSTEM
a.

Check if the lighting system is malfunctioning (See page Vehicle Exterior>LIGHTING (EXT)>LIGHTING SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING).

HINT:

Customization may not be possible depending on the malfunction in the lighting system.


OK:

No malfunctions are present in the lighting system.




OK

5.CHECK CUSTOMIZE ITEMS

NG

5.CHECK CUSTOMIZE ITEMS
a.

Display the "Vehicle Customization" screen.


b.

Make a note of the customizable items for each main body ECU (multiplex network body ECU) related system.

HINT:

These items shown as customizable via the navigation system vehicle customization screen can also be changed using the GTS. In a following step, the GTS will be used.


i.

To match-up the items in the multi-display assembly with the items on the GTS, check the customize parameters list for the power door lock control system related items that can be customized via the multi-display assembly screen (See page Vehicle Interior>DOOR LOCK>POWER DOOR LOCK CONTROL SYSTEM>CUSTOMIZE PARAMETERS).


ii.

To match-up the items in the multi-display assembly with the items on the GTS, check the customize parameters list for the wireless door lock control system related items that can be customized via the multi-display assembly screen (See page Vehicle Interior>DOOR LOCK>WIRELESS DOOR LOCK CONTROL SYSTEM(w/ Entry and Start System)>CUSTOMIZE PARAMETERS).


iii.

To match-up the items in the multi-display assembly with the items on the GTS, check the customize parameters list for the lighting system related items that can be customized via the multi-display assembly screen (See page Vehicle Exterior>LIGHTING (EXT)>LIGHTING SYSTEM>CUSTOMIZE PARAMETERS).



c.

Using the GTS, confirm that it is possible to change the settings of the customize parameters that are available for customization via the multi-display assembly screen.

OK:

The items available for customization via the multi-display assembly screen can be customized successfully using the GTS.




OK

REPLACE MULTI-MEDIA MODULE RECEIVER ASSEMBLY

NG

REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)