Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION ANTENNA (for Roof Side) › 2014.08–2015.08
RM2660E _56 Audio / Visual / Telematics _052829 NAVIGATION / MULTI INFO DISPLAY _0255495 NAVIGATION ANTENNA(for Roof Side) A

NAVIGATION / MULTI INFO DISPLAY  NAVIGATION ANTENNA(for Roof Side)  INSTALLATION  


PROCEDURE

Hide 86760 1.INSTALL NAVIGATION ANTENNA

a.
E161266

Align the positioning pin of the navigation antenna and set the antenna on the vehicle.


b.

Attach the 2 claws to install the navigation antenna.


c.

Install the navigation antenna nut.

Torque:
4.5 N*m (46 kgf*cm, 40 in.*lbf)


d.

Connect the 2 navigation antenna connectors.


e.

Attach the 2 claws to install the protector.


f.

Attach the 4 claws to install the 2 navigation antenna connectors.


Hide 6.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).