The No. 1 ultrasonic sensor (front corner sensor RH) is installed on the front bumper. The ECU detects obstacles based on signals received from the No. 1 ultrasonic sensor (front corner sensor RH). If the No. 1 ultrasonic sensor (front corner sensor RH) has an open circuit or other malfunction, it will not function normally.
| DTC Code | DTC Detection Condition | Trouble Area |
|---|---|---|
| C1AE4 | A malfunction of the No. 1 ultrasonic sensor (front corner sensor RH). | ·
No. 1 ultrasonic sensor (front corner sensor RH) ·
Clearance warning ECU assembly |
If DTCs are output after repairs, turn the engine switch on (IG) and turn the TOYOTA parking assist-sensor system on. Then clear the DTCs (See page Audio / Visual / Telematics>PARK ASSIST / MONITORING>TOYOTA PARKING ASSIST-SENSOR SYSTEM>DTC CHECK / CLEAR).
Clear the DTCs (See page Audio / Visual / Telematics>PARK ASSIST / MONITORING>TOYOTA PARKING ASSIST-SENSOR SYSTEM>DTC CHECK / CLEAR).
Check for DTCs (See page Audio / Visual / Telematics>PARK ASSIST / MONITORING>TOYOTA PARKING ASSIST-SENSOR SYSTEM>DTC CHECK / CLEAR).
| Result | Proceed to |
|---|---|
| No DTC is output. | A |
| Only DTC C1AE4 is output. | B |
| DTC C1AE4 and C1AEC are output. | C |
A
(See pageGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING)
B
C
(See pageAudio / Visual / Telematics>PARK ASSIST / MONITORING>TOYOTA PARKING ASSIST-SENSOR SYSTEM>C1AEC)
Replace the No. 1 ultrasonic sensor (front corner sensor RH) with a normally functioning one (See page Audio / Visual / Telematics>PARK ASSIST / MONITORING>ULTRASONIC SENSOR (for Front)>REMOVAL).
NEXT
Clear the DTCs (See page Audio / Visual / Telematics>PARK ASSIST / MONITORING>TOYOTA PARKING ASSIST-SENSOR SYSTEM>DTC CHECK / CLEAR).
Check for DTCs (See page Audio / Visual / Telematics>PARK ASSIST / MONITORING>TOYOTA PARKING ASSIST-SENSOR SYSTEM>DTC CHECK / CLEAR).
| Result | Proceed to |
|---|---|
| DTC C1AE4 is not output. | A |
| DTC C1AE4 is output. | B |
A
B