Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › PARKING ASSIST MONITOR SYSTEM(w/o Side Monitor System) › 2014.08–2015.08
RM2660E _56 Audio / Visual / Telematics _052831 PARK ASSIST / MONITORING _0255506 PARKING ASSIST MONITOR SYSTEM(w/o Side Monitor System) J

PARK ASSIST / MONITORING  PARKING ASSIST MONITOR SYSTEM(w/o Side Monitor System)  Image from Camera for Parking Assist Monitor is Abnormal  


DESCRIPTION

The video signal from the rear television camera assembly is transmitted to the multi-media module receiver assembly.

WIRING DIAGRAM

E240589E11
1.781,0.354 2.198,0.563 0.417,0.208 10 false GVIF 5.021,0.333 5.438,0.542 0.417,0.208 10 false GVIF 1.24,0.656 1.656,0.865 0.417,0.208 10 false F83 1.219,0.813 2.865,1.073 1.646,0.26 10 false Multi-display Assembly 2.24,0.208 2.427,0.396 0.188,0.188 10 false 1 4.729,0.135 4.917,0.323 0.188,0.188 10 false 1 2.219,1.99 2.406,2.177 0.188,0.188 10 false 1 2.229,1.219 2.417,1.406 0.188,0.188 10 false 4 2.229,1.615 2.417,1.802 0.188,0.188 10 false 2 2.24,2.396 2.427,2.583 0.188,0.188 10 false 3 4.708,1.115 4.896,1.302 0.188,0.188 10 false 39 4.698,1.521 4.885,1.708 0.188,0.188 10 false 18 4.688,1.917 4.875,2.104 0.188,0.188 10 false 19 4.698,2.313 4.885,2.5 0.188,0.188 10 false 40 4.677,2.708 4.865,2.896 0.188,0.188 10 false 12 4.646,0.344 5.063,0.552 0.417,0.208 10 false F82 4.656,1.313 5.073,1.521 0.417,0.208 10 false F77 4.667,1.708 5.083,1.917 0.417,0.208 10 false F77 4.656,2.104 5.073,2.313 0.417,0.208 10 false F77 4.667,2.5 5.083,2.708 0.417,0.208 10 false F77 4.656,2.896 5.073,3.104 0.417,0.208 10 false F77 5.021,1.302 5.438,1.51 0.417,0.208 10 false CA+ 5.052,1.698 5.469,1.906 0.417,0.208 10 false V+ 5.052,2.104 5.469,2.313 0.417,0.208 10 false V- 5.042,2.5 5.625,2.708 0.583,0.208 10 false CGND 5.031,2.854 5.615,3.063 0.583,0.208 10 false GND1 1.708,2.51 2.292,2.719 0.583,0.208 10 false CGND 1.844,1.313 2.26,1.521 0.417,0.208 10 false CB+ 1.854,1.719 2.271,1.927 0.417,0.208 10 false CV+ 1.854,2.104 2.271,2.313 0.417,0.208 10 false CV- 0.688,2.75 1.104,2.958 0.417,0.208 10 false S5 0.688,2.917 2.844,3.146 2.156,0.229 10 false Rear Television Camera Assembly 4.979,3.135 6.375,3.542 1.396,0.406 10 false Multi-media Module Receiver Assembly 0.656,3.427 1.594,3.698 0.938,0.271 10 false : GVIF Cable

CAUTION / NOTICE / HINT

NOTICE:
·

When "System initializing" is displayed on the multi-media module receiver assembly after disconnecting the cable from the negative (-) battery terminal, correct the steering angle neutral point (See page Audio / Visual / Telematics>PARK ASSIST / MONITORING>PARKING ASSIST MONITOR SYSTEM(w/o Side Monitor System)>INITIALIZATION).

·

Depending on the parts that are replaced or operations that are performed during vehicle inspection or maintenance, calibration of other systems as well as the parking assist monitor system (w/o Side Monitor System) may be needed (See page Audio / Visual / Telematics>PARK ASSIST / MONITORING>PARKING ASSIST MONITOR SYSTEM(w/o Side Monitor System)>CALIBRATION).



HINT:

Images may be unclear even in normal conditions if:

·

Noise may occur in the image during power back door operation (w/ Power Back Door System).

·

Electrical devices are used in the cabin (noise may occur in the image).

·

Accessories that generate radio waves have been installed (noise may occur in the image).

·

The outer mirror switch assembly is operated (noise may occur in the image).

·

The camera screen is frosted over (the image immediately after turning the ignition switch to ON may be blurred or darker than normal).

·

The camera lens is dirty with snow, mud, etc.

·

A strong beam of light, such as a sunbeam or headlight, hits the camera.

·

It is too dark around the camera (at night etc.).

·

The ambient temperature around the camera is either too high or too low.

·

The vehicle is tilted at a steep angle.

·

The rear television camera assembly lens is scratched.

·

The rear television camera assembly lens has drops of water on it or the humidity is high.

·

When the camera is used under fluorescent lights, sodium lights, or mercury lights etc., the lights and the illuminated area may appear to flicker.



PROCEDURE

1.CHECK HARNESS AND CONNECTOR (MULTI-MEDIA MODULE RECEIVER - REAR TELEVISION CAMERA AND BODY GROUND)

OK

2.CHECK MULTI-MEDIA MODULE RECEIVER ASSEMBLY (CA+, CGND)

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

2.CHECK MULTI-MEDIA MODULE RECEIVER ASSEMBLY (CA+, CGND)

OK

3.CHECK REAR TELEVISION CAMERA ASSEMBLY (CV+, CGND)

NG

REPLACE MULTI-MEDIA MODULE RECEIVER ASSEMBLY

3.CHECK REAR TELEVISION CAMERA ASSEMBLY (CV+, CGND)

OK

4.REPLACE HARNESS AND CONNECTOR (GVIF CABLE)

NG

4.REPLACE HARNESS AND CONNECTOR (GVIF CABLE)
a.

Replace the harness and connector (GVIF cable) with a normally functioning one.



NEXT

5.CHECK PARKING ASSIST MONITOR SYSTEM (w/o Side Monitor System)
5.CHECK PARKING ASSIST MONITOR SYSTEM (w/o Side Monitor System)
a.

Check if the same malfunction recurs when the parking assist monitor screen is displayed.

OK:

Malfunction does not reoccur (returns to normal).




OK

NG

REPLACE MULTI-MEDIA MODULE RECEIVER ASSEMBLY