The DTCs above are stored during the self diagnosis of the seat belt control ECU.
| DTC Code | DTC Detection Condition | Trouble Area |
|---|---|---|
| B2015 | Open in the right side upper MOS. | Seat belt control ECU |
| B2016 | Open in the right side lower MOS. | Seat belt control ECU |
| B2020 | Open in the left side upper MOS. | Seat belt control ECU |
| B2021 | Open in the left side lower MOS. | Seat belt control ECU |
| B2025 | Malfunction in the right side current detection HI circuit. | Seat belt control ECU |
| B2026 | Malfunction in the right side current detection LO circuit. | Seat belt control ECU |
| B2027 | Overcurrent in the right side circuit. | Seat belt control ECU |
| B2030 | Malfunction in the left side current detection HI circuit. | Seat belt control ECU |
| B2031 | Malfunction in the left side current detection LO circuit. | Seat belt control ECU |
| B2032 | Overcurrent in the left side circuit. | Seat belt control ECU |
| B2035 | Adherence malfunction in the power supply relay. | Seat belt control ECU |
| B2040 | EEPROM malfunction. | Seat belt control ECU |
| B2041 | Decline in raised voltage. | Seat belt control ECU |
| B2043 | Decline in B+ voltage. | Seat belt control ECU |
| B2047 | Malfunction in the inner circuit of the seat belt control ECU. | Seat belt control ECU |
Using the intelligent tester, enter the following menus: Body / Pre-Crash / Trouble Code.
Clear the DTCs (See page Vehicle Interior>PRE-CRASH SAFETY>PRE-CRASH SAFETY SYSTEM>DTC CHECK / CLEAR).
Check for DTCs (See page Vehicle Interior>PRE-CRASH SAFETY>PRE-CRASH SAFETY SYSTEM>DTC CHECK / CLEAR).
| Result | Proceed to |
|---|---|
| OK
(DTC is not output) |
A |
| NG
(for LHD) |
B |
| NG
(for RHD |
C |
A
(See pageGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING)
B
C