Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
A bolt without a torque specification is shown in the standard bolt chart (See page General>SPECIFICATIONS>STANDARD BOLT>SPECIFIED TORQUE FOR STANDARD BOLTS).
73320A
1.INSTALL NO. 1 SEAT 3 POINT TYPE BELT ASSEMBLY LH
Install the belt with the nut labeled A.
Install the belt sensor with the 3 nuts labeled B.
73373F
2.INSTALL REAR SEAT SHOULDER BELT HOLE COVER
Install the seat belt as shown in the illustration.
Attach the 3 claws to install the shoulder belt hole cover.
71099
3.INSTALL REAR LOWER SEATBACK COVER SUB-ASSEMBLY LH
71379B
4.INSTALL REAR SEATBACK HINGE COVER LH
5.INSTALL SEATBACK COVER WITH PAD
73174A
6.INSTALL REAR SEAT BELT HOLE COVER LH
73237
7.INSTALL SHOULDER BELT ANCHOR COVER
71931B
8.INSTALL REAR NO. 1 SEAT HEADREST SUPPORT ASSEMBLY
71940A
9.INSTALL REAR SEAT HEADREST ASSEMBLY
71702B
10.INSTALL REAR SEATBACK BOARD SUB-ASSEMBLY LH
72997B
11.INSTALL REAR SEATBACK COVER
12.INSTALL SEAT CUSHION COVER WITH PAD
73390C
13.INSTALL REAR NO. 1 SEAT INNER BELT ASSEMBLY LH
78956
14.INSTALL REAR SEAT UNDER TRAY COVER LH
72995
15.INSTALL REAR SEAT CUSHION COVER RH
76974E
16.INSTALL REAR UNDER SIDE COVER LH
71369B
17.INSTALL REAR SEATBACK STAY COVER LH
73178B
18.INSTALL SEAT BELT ANCHOR COVER CAP
71301B
19.INSTALL REAR NO. 1 SEAT HINGE SUB-ASSEMBLY RH
71302B
20.INSTALL REAR NO. 1 SEAT HINGE SUB-ASSEMBLY LH
71469
21.INSTALL REAR NO. 2 SEAT PROTECTOR
79965
22.INSTALL REAR NO. 2 SEAT LEG SIDE COVER
72265
23.INSTALL UPPER SEAT TRACK RAIL COVER RH
72266
24.INSTALL UPPER SEAT TRACK RAIL COVER LH
71833A
25.INSTALL REAR NO. 1 SEAT RECLINING COVER RH
71834G
26.INSTALL REAR NO. 1 SEAT RECLINING COVER LH
72526A
27.INSTALL RECLINING ADJUSTER RELEASE HANDLE LH
72329
28.INSTALL SEAT ADJUSTER BOLT COVER
29.INSTALL REAR NO. 1 SEAT ASSEMBLY LH
Install the rear No. 1 seat assembly (See page Vehicle Interior>SEAT>REAR NO. 1 SEAT ASSEMBLY (for 60/40 Split Seat Type 60 Side)>INSTALLATION).