| Even when the wireless charging system is turned on, the indicator does not illuminate green.
|
Proceed to "Wireless Charger Power Source Circuit"
|
( )
|
| Mobile wireless charger cradle assembly
|
( )
|
| When the wireless charging system is turned on, the indicator illuminates in green, but even when a portable device is placed in the charging area, the indicator does not illuminate in amber (charging does not start).
|
Check that the device being used is Qi-compatible.
|
-
|
| When a case or accessory is attached to the device, check that the case or accessory is Qi-compatible.
|
-
|
| Check that there is no gap between the Qi-compatible device, case or accessory and the charging area.
|
-
|
| Check that there are no foreign objects between the Qi-compatible device, case or accessory and the charging area.
|
-
|
| Check that the Qi-compatible device is not fully charged.
|
-
|
| Check that the Qi-compatible device is near the center of the charging area.
|
-
|
| Check that the charging area of the Qicompatible device is facing down.
|
-
|
| Check that there is no equipment in the surrounding area generating strong radio waves.
|
-
|
| Check that there is only one Qi-compatible device in the charging area.
|
-
|
| Check that the charging cable is not connected to the Qi-compatible device.
|
-
|
| Check that the temperature around the Qi-compatible device is within the usable range.
|
-
|
| Check that the portable device can be charged with another Qi-compatible charger.
|
-
|
| Check that charging works with other Qi-compatible devices.
|
-
|
| Proceed to "Status Signal Circuit"
|
( )
|
| Mobile wireless charger cradle assembly
|
( )
|
| When the wireless charging system is turned on, the indicator illuminates in green. Afterward, when a portable device is placed in the charging area, the indicator illuminates in amber, but the indicator turns green before charging completes (charging does not complete).
|
Check that the Qi-compatible device is not moved outside the charging area.
|
-
|
| Check that the temperature around the Qi-compatible device is within the usable range.
|
-
|
| Check that there is no equipment in the surrounding area generating strong radio waves.
|
-
|
| Proceed to "Status Signal Circuit"
|
( )
|
| Mobile wireless charger cradle assembly
|
( )
|
| Even when the headlight dimmer switch assembly is set to TAIL or HEAD, the wireless charger switch nighttime illumination does not light up and the indicator does not dim.
|
Proceed to "Wireless Charger Illumination Circuit"
|
( )
|
| Mobile wireless charger cradle assembly
|
( )
|
| The indicator blinkes in amber (pattern 1)*
|
Proceed to "Status Signal Circuit"
|
( )
|
| Mobile wireless charger cradle assembly
|
( )
|
| The indicator blinkes in amber (pattern 2)*
|
Check that the charging frequency is not changing.
|
-
|
| Mobile wireless charger cradle assembly
|
( )
|
| The indicator blinkes in amber (pattern 3)*
|
Check that there is no gap between the Qi-compatible device, case or accessory and the charging area.
|
-
|
| When a case or accessory is attached to the device, check that the case or accessory is Qi-compatible.
|
-
|
| Check that there are no foreign objects between the Qi-compatible device, case or accessory and the charging area.
|
-
|
| Check that the Qi-compatible device is near the center of the charging area.
|
-
|
| Check that the Qi-compatible device is not moved from the position it was in when charging started.
|
-
|
| Mobile wireless charger cradle assembly
|
( )
|
| The indicator blinkes in amber (pattern 4)*
|
Check that the internal temperature of the charger has not increased due to a malfunction.
|
-
|
| Mobile wireless charger cradle assembly
|
( )
|