Home › Vehicle Exterior › DOOR / HATCH › TAIL GATE CLOSER SYSTEM › from 2015.08
RM2660E _59 Vehicle Exterior _052852 DOOR / HATCH _0255760 TAIL GATE CLOSER SYSTEM C

DOOR / HATCH  TAIL GATE CLOSER SYSTEM  B225B  Tail Gate Panel Half Switch or Courtesy Switch RH  


DESCRIPTION

The No. 2 main body ECU receives the half-latch switch, pawl switch and lower tail gate courtesy switch signals from the lower tail gate lock assembly RH and detects the open/closed status of the lower tail gate. DTC B225B is stored when the No. 2 main body ECU receives a half-latch switch, pawl switch or lower tail gate courtesy switch malfunction signal from the lower tail gate lock assembly RH.

DTC Code DTC Detection Condition Trouble Area
B225B A half-latch switch, pawl switch or lower tail gate courtesy switch malfunction (open or short circuit) signal from the lower tail gate lock RH is received.
·

Lower tail gate lock assembly RH

·

Harness or connector

·

No. 2 main body ECU



WIRING DIAGRAM

B433471E05
5.177,2.354 5.5,2.5 0.323,0.146 10 false L50 5.177,2.531 6.552,2.771 1.375,0.24 10 false No. 2 Main Body ECU 4.917,3.938 5.24,4.083 0.323,0.146 10 false L52 5.146,3.281 5.406,3.427 0.26,0.146 10 false 7 5.333,3.375 5.844,3.521 0.51,0.146 10 false CYRH 4.906,4.094 6.979,4.531 2.073,0.438 10 false Power Back Door Unit Assembly (Power Back Door ECU) 0.792,2.667 1.115,2.813 0.323,0.146 10 false h4 0.792,2.813 3.01,3.052 2.219,0.24 10 false Lower Tail Gate Lock Assembly RH 5.083,1.906 5.26,2.052 0.177,0.146 10 false 22 5.146,1.219 5.25,1.365 0.104,0.146 10 false 8 5.073,0.563 5.25,0.708 0.177,0.146 10 false 16 5.375,2.01 5.698,2.156 0.323,0.146 10 false FUL 5.354,1.344 5.677,1.49 0.323,0.146 10 false HAF 5.333,0.656 5.656,0.802 0.323,0.146 10 false POL 3.479,1.906 3.802,2.052 0.323,0.146 10 false 2 3.479,1.24 3.802,1.385 0.323,0.146 10 false 1 3.49,0.563 3.813,0.708 0.323,0.146 10 false 4 3.115,1.906 3.396,2.052 0.281,0.146 10 false FUL 3.115,1.24 3.406,1.385 0.292,0.146 10 false HAF 3.115,0.563 3.417,0.708 0.302,0.146 10 false POL 1.125,2.156 3.167,2.302 2.042,0.146 10 false Lower Tail Gate Courtesy Switch 0.479,1.906 0.802,2.052 0.323,0.146 10 false E1 0.323,1.906 0.427,2.052 0.104,0.146 10 false 3 1.542,1.5 2.604,1.646 1.063,0.146 10 false Half-latch Switch 1.688,0.792 2.458,0.938 0.771,0.146 10 false Pawl Switch

PROCEDURE

1.READ VALUE USING GTS
a.

Check the Data List for proper functioning of the half-latch switch, pawl switch and lower tail gate courtesy switch (See page Vehicle Exterior>DOOR / HATCH>TAIL GATE CLOSER SYSTEM>DATA LIST / ACTIVE TEST).

Body No. 4
Tester Display Measurement Item/Range Normal Condition Diagnostic Note
Half Latch Switch RH Half-latch switch signal / ON or OFF ON: Lower tail gate open
OFF: Lower tail gate closed
-
Courtesy Switch RH Lower tail gate courtesy switch RH signal / ON or OFF ON: Lower tail gate open
OFF: Lower tail gate closed
-
Luggage Pawl Switch Pawl switch signal / ON or OFF ON: Lower tail gate lock motor operating
OFF: Lower tail gate open or closed
-

OK:

The display is as specified in the normal condition.




OK

2.CHECK DTC OUTPUT

NG

3.INSPECT LOWER TAIL GATE LOCK ASSEMBLY RH
2.CHECK DTC OUTPUT
a.

Starting with the lower tail gate closed, open and close the lower tail gate 6 times.




d.

Starting with the lower tail gate closed, open and close the lower tail gate 6 times.


e.

Recheck for DTCs (See page Vehicle Exterior>DOOR / HATCH>TAIL GATE CLOSER SYSTEM>DTC CHECK / CLEAR).

OK:

DTC B225B is not output.




OK

NG

3.INSPECT LOWER TAIL GATE LOCK ASSEMBLY RH
a.

Remove the lower tail gate lock assembly RH (See page Vehicle Exterior>DOOR / HATCH>BACK DOOR>DISASSEMBLY).


b.

Inspect the lower tail gate lock assembly RH (See page Vehicle Exterior>DOOR / HATCH>BACK DOOR>INSPECTION).



OK

4.READ VALUE USING GTS

NG

REPLACE LOWER TAIL GATE LOCK ASSEMBLY RH

4.READ VALUE USING GTS
a.

Check the Data List for proper function of the lower tail gate courtesy switch (See page Vehicle Exterior>DOOR / HATCH>POWER BACK DOOR SYSTEM>DATA LIST / ACTIVE TEST).

Back Door
Tester Display Measurement Item/Range Normal Condition Diagnostic Note
RH CTSY SW of Tail Gate Panel Lower tail gate courtesy switch RH signal / ON or OFF ON: Tail gate closed
OFF: Tail gate open
-

OK:

The display is as specified in the normal condition.




OK

5.CHECK HARNESS AND CONNECTOR (LOWER TAIL GATE LOCK ASSEMBLY RH - NO. 2 MAIN BODY ECU AND BODY GROUND)

NG

REPLACE POWER BACK DOOR UNIT ASSEMBLY

5.CHECK HARNESS AND CONNECTOR (LOWER TAIL GATE LOCK ASSEMBLY RH - NO. 2 MAIN BODY ECU AND BODY GROUND)
a.

Disconnect the h4 lower tail gate lock assembly RH connector.


b.

Disconnect the L50 No. 2 main body ECU connector.


c.

Disconnect the L52 power back door unit assembly (power back door ECU) connector.


d.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
h4-1 (HAF) - L50-8 (HAF) Always Below 1 Ω
h4-2 (FUL) - L50-22 (FUL) Always Below 1 Ω
h4-4 (POL) - L50-16 (POL) Always Below 1 Ω
h4-3 (E1) - Body ground Always Below 1 Ω
h4-1 (HAF) - Body ground Always 10 kΩ or higher
h4-2 (FUL) - Body ground Always 10 kΩ or higher
h4-4 (POL) - Body ground Always 10 kΩ or higher




OK

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR