Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
45287
1.REMOVE LOWER STEERING COLUMN COVER
for Manual Tilt and Manual Telescopic Steering Column:
Remove the lower steering column cover (See Page Steering>STEERING COLUMN>STEERING COLUMN ASSEMBLY (for Manual Tilt and Manual Telescopic Steering Column)>REMOVAL).
for Power Tilt and Power Telescopic Steering Column:
Remove the lower steering column cover (See Page Steering>STEERING COLUMN>STEERING COLUMN ASSEMBLY (for Power Tilt and Power Telescopic Steering Column)>REMOVAL).
89235A
2.REMOVE TILT AND TELESCOPIC SWITCH (for LHD or for RHD LH Side, for Power Tilt and Telescopic Steering Column)
45286B
3.REMOVE UPPER STEERING COLUMN COVER
for Manual Tilt and Manual Telescopic Steering Column:
Remove the upper steering column cover (See Page Steering>STEERING COLUMN>STEERING COLUMN ASSEMBLY (for Manual Tilt and Manual Telescopic Steering Column)>REMOVAL).
for Power Tilt and Power Telescopic Steering Column:
Remove the upper steering column cover (See Page Steering>STEERING COLUMN>STEERING COLUMN ASSEMBLY (for Power Tilt and Power Telescopic Steering Column)>REMOVAL).
84650
4.REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY
Disconnect the 2 connectors.
Using a screwdriver wrapped with protective tape, disengage the claw and remove the wiper switch.
| *a | Protective Tape |
If the claw is pushed with excessive force, it may be broken.