Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
81150
1.INSTALL HEADLIGHT ASSEMBLY LH
Connect the connectors.
Install the headlight assembly LH with the 4 bolts.
53883F
2.INSTALL FRONT FENDER MAIN SEAL LH
52119A
3.INSTALL FRONT BUMPER COVER
4.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).
5.ADJUST HEADLIGHT AIMING
6.ADJUST FOG LIGHT AIMING