A bolt without a torque specification is shown in the standard bolt chart (See page General>SPECIFICATIONS>STANDARD BOLT>SPECIFIED TORQUE FOR STANDARD BOLTS).
89940
1.INSTALL HEADLIGHT SWIVEL ECU ASSEMBLY
Install the headlight swivel ECU assembly with the nut.
Connect the connector.
55433B
2.INSTALL LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL
55443D
3.INSTALL INSTRUMENT PANEL BOX DOOR KNOB
55476A
4.INSTALL NO. 3 INSTRUMENT CLUSTER FINISH PANEL GARNISH
73990
5.INSTALL LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY
62111C
6.INSTALL COWL SIDE TRIM BOARD RH
67913B
7.INSTALL FRONT DOOR SCUFF PLATE RH
55607
8.INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
55317A
9.INSTALL INSTRUMENT SIDE PANEL RH
55402C
10.INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH
55448A
11.INSTALL NO. 1 INSTRUMENT PANEL FINISH CUSHION
12.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).
13.CHECK SRS WARNING LIGHT