Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
81150
1.INSTALL HEADLIGHT ASSEMBLY LH
Set the headlight assembly LH in place.
Install the bolt and 3 screws.
Connect the 2 connectors.
53883F
2.INSTALL FRONT FENDER MAIN SEAL LH
52119A
3.INSTALL FRONT BUMPER COVER
for Standard:
(See page Vehicle Exterior>EXTERIOR PANELS / TRIM>FRONT BUMPER(for Standard)>INSTALLATION)
w/ Winch:
(See page Vehicle Exterior>EXTERIOR PANELS / TRIM>FRONT BUMPER(w/ Winch)>INSTALLATION)
4.ADJUST HEADLIGHT AIMING
5.ADJUST FOG LIGHT AIMING