Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › BACK DOOR GARNISH (w/ Tire Carrier) › from 2015.08
RM2660E _59 Vehicle Exterior _052857 EXTERIOR PANELS / TRIM _0255848 BACK DOOR GARNISH(w/ Tire Carrier) A

EXTERIOR PANELS / TRIM  BACK DOOR GARNISH(w/ Tire Carrier)  INSTALLATION  


PROCEDURE

Hide 76802C 3.INSTALL NO. 2 BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY

a.

Pass the wire harness of the license plate light through the tail gate, and install the wire harness.


b.

Attach the 8 clips to install the No. 2 back door outside garnish sub-assembly.

B433615


c.
B186238

Install the 2 nuts and connect the connector.


Hide 64780A 4.INSTALL BACK DOOR TRIM PANEL ASSEMBLY

Hide 64893 5.INSTALL BACK DOOR TRIM COVER RH

Hide 64894 6.INSTALL BACK DOOR TRIM COVER LH

Hide 76801 8.INSTALL BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY

a.

Attach the 6 clips to install the back door outside garnish sub-assembly.


Hide 81590A 9.INSTALL REAR LIGHT ASSEMBLY LH

Hide 81580D 10.INSTALL REAR LIGHT ASSEMBLY RH

HINT:

Use the same procedure described for the LH side.