Use the following procedure to troubleshoot the pre-crash safety system.
*: Use the GTS.
| Proceed to |
|---|
| NEXT |
NEXT
| Pre-crash Safety System Customer Problem Analysis | Vehicle Brought to Workshop | ||||||
| Year | Month | Day | |||||
| Dealer name | Person in charge at headquarters | Telephone number | |||||
| Shop name | Person in charge at shop | ||||||
| Frame type | Frame No. | First Registered Year | Total distance traveled | ||||
| Customer Concerns
(Include details) |
Does not operate | ||||||
| Operates abnormally | |||||||
| Date of malfunction occurrence
(Since when) |
Year | Month | Day | Approx. Time | |||
| Date of last inspection | Year | Month | Day | ||||
| Frequency of problem symptoms | Once / Occasionally (times per day, times per month) / Every time certain conditions are met ( ) | ||||||
| Weather | Sunny / Cloudy / Rain (Heavy/Light) / Snow (Amount of snowfall cm) / Other ( ) | Vehicle speed | Approximately ( ) km/h | ||||
| Place | Prefecture
(Attach a map if possible) |
||||||
| Driving path (where vehicle turned, where driver attempted to drive to, etc.)
* Describe the conditions immediately after the occurrence in as much detail as possible. |
Conditions of Occurrence Diagram | ||||||
0.781,1.458 0.688,0.583
0.688,0.583 0.844,0.583
true
1.385,1.396 1.76,0.854
1.76,0.854 1.917,0.854
true
1.885,1.427 2.448,1.521
2.448,1.521 2.448,1.708
true
1.604,1.781 1.969,2.469
1.969,2.469 2.125,2.469
true
1.438,2.177 1.729,2.927
1.729,2.927 1.885,2.927
true
0.698,2.833 1.125,1.906
true
0.688,0.073 1.865,0.271
1.177,0.198
10
false
Diagram Example
0.896,0.5 2.021,0.677
1.125,0.177
10
false
Oncoming vehicle
1.031,0.823 1.427,0.99
0.396,0.167
10
false
North
1.969,0.771 2.979,0.979
1.01,0.208
10
false
Stopped vehicle
2.104,1.698 3.083,2.052
0.979,0.354
10
false
Approximately ( ) m
0.313,2.844 1.25,3.021
0.938,0.177
10
false
Occurred here
2.177,2.385 2.698,2.583
0.521,0.198
10
false
Vehicle
1.927,2.844 2.542,3.042
0.615,0.198
10
false
Guardrail
|
|||||||
| Surrounding road conditions
Describe whether there were any billboards, metal objects on the road (manholes), guardrails, pipes, cat's eyes, gate bars, etc. |
|||||||
| Urban area / Suburbs / Highway / Other ( ) | Road surface conditions | Temperature | About °C ( °F) | ||||
| Direction of travel | Straight / Right turn / Left turn / Right curve / Left curve | Snow wall(s) | Y / N | ||||
| Driving lane | Number of lanes on one side (lanes) / ( ) lane(s) from left | Backlighting | Y / N | ||||
| Condition of external area around detection sensor | No foreign matter adhesion / Foreign matter adhesion (water, snow, ice, other) | ||||||
| Additional information about condition of vehicle exterior
(other than above) |
|||||||
| DTC | First Time (when vehicle brought to workshop) | ||||||
| Second Time (after clearing DTC) | |||||||
| Status of operation switch | Pre-crash safety system cancel switch | Far / Medium / Near / OFF | VSC OFF switch | ON / OFF | |||
| Serial number of main part
* Fill in when removing, installing or replacing part |
Forward recognition Camera | ||||||
| Describe the items to the right in as much detail as possible. | Driver operation | Accelerator pedal operated / Brake pedal operated / Steering wheel operated | Time elapsed after engine is started | Approximately ( ) minutes | |||
| Tire pressure inspection result | Front: LH ( ) kPa RH ( ) kPa Standard ( ) kPa | ||||||
| Rear: LH ( ) kPa RH ( ) kPa Standard ( ) kPa | |||||||
| Sensor optical axis inspection result | Forward recognition camera | Accident history | Y / N | ||||
| Millimeter wave radar sensor assembly | Accident history | Y / N | |||||
| Vehicle modified | Y ( ) / N | ||||||
| Items installed or attached around windshield glass | Drive recorder* / Radar detector / Navigation unit (genuine/non-genuine) / ETC / Charms or toys / Other:
*: Since this device holds information valuable to the investigation, make sure to retrieve this device if permission is granted by the customer. |
||||||
| Proceed to |
|---|
| NEXT |
NEXT
Measure the battery voltage with the engine switch off.
11 to 14 V
If the voltage is below 11 V, recharge or replace the battery before proceeding to the next step.
| Proceed to |
|---|
| OK |
| NG |
OK
NG
Adjust the reflector height.
Click hereEngine / Hybrid System>CRUISE CONTROL>MILLIMETER WAVE RADAR SENSOR>ADJUSTMENT
Place the reflector.
Click hereEngine / Hybrid System>CRUISE CONTROL>MILLIMETER WAVE RADAR SENSOR>ADJUSTMENT
Connect the GTS to the DLC3.
Turn the engine switch on (IG).
Turn the GTS on.
Enter the following menus: Body Electrical / Pre-Crash 2 / Utility / Front Beam Axis Misalignment Reading.
Check the amount of misalignment and make a note.
Enter the following menus: Body Electrical / Pre-Crash 2 / Utility / Front Beam Axis Offset Reading.
Check the amount of offset and make a note.
| Proceed to |
|---|
| NEXT |
NEXT
Use the GTS to check if the CAN communication system is functioning normally.
| DTC Condition | Proceed to |
|---|---|
| CAN DTC is not output | A |
| CAN DTC is output (for LHD (w/ Central Gateway ECU)) | B |
| CAN DTC is output (for RHD (w/ Central Gateway ECU)) | C |
A
B
C
Check the condition of the warning lights on the combination meter assembly.
| DTC Condition | Proceed to |
|---|---|
| Only the PCS warning light is blinking | A |
| The PCS warning light is not blinking | |
| The PCS OFF warning light and other warning lights are illuminated or blinking | B |
A
B
Check if a pre-crash safety system warning message is displayed on the multi-information display in the combination meter assembly.
| DTC Condition | Proceed to |
|---|---|
| "Pre-crash Safety Malfunction Visit Your Dealer" is displayed | A |
| "Pre-crash Safety Unavailable", "Pre-crash Safety Unavailable Clean Sensor". "Forward Camera Systems Unavailable Clean Windshield" or "Forward Camera Systems Unavailable" is displayed | B |
| Warning message is not displayed | C |
A
B
C
Check for DTCs.
Click hereVehicle Interior>PRE-CRASH SAFETY>PRE-CRASH SAFETY SYSTEM>DTC CHECK / CLEAR
Record the DTCs.
Clear the DTCs.
Recheck for DTCs.
Attempt to duplicate the malfunction and check if the DTCs are output again.
Click hereVehicle Interior>PRE-CRASH SAFETY>PRE-CRASH SAFETY SYSTEM>DTC CHECK / CLEAR
| DTC Condition | Proceed to |
|---|---|
| DTCs are not output | A |
| DTCs are output | B |
| No DTCs are output, and malfunction cannot be duplicated or checked | C |
A
B
C
Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING
Refer to Problem Symptoms Table.
Click hereVehicle Interior>PRE-CRASH SAFETY>PRE-CRASH SAFETY SYSTEM>PROBLEM SYMPTOMS TABLE
| Result | Proceed to |
|---|---|
| Fault is not listed in Problem Symptoms Table | A |
| Fault is listed in Problem Symptoms Table | B |
A
B
Data List / Active Test
Click hereVehicle Interior>PRE-CRASH SAFETY>PRE-CRASH SAFETY SYSTEM>DATA LIST / ACTIVE TEST
Terminals of ECU
Click hereVehicle Interior>PRE-CRASH SAFETY>PRE-CRASH SAFETY SYSTEM>TERMINALS OF ECU
| Proceed to |
|---|
| NEXT |
NEXT
| Proceed to |
|---|
| NEXT |
NEXT
| Proceed to |
|---|
| NEXT |
NEXT