Home › Vehicle Interior › PRE-CRASH SAFETY › PRE-CRASH SAFETY SYSTEM › from 2017.08
RM2660E _58 Vehicle Interior _052844 PRE-CRASH SAFETY _0255621 PRE-CRASH SAFETY SYSTEM Y

PRE-CRASH SAFETY  PRE-CRASH SAFETY SYSTEM  HOW TO PROCEED WITH TROUBLESHOOTING  


CAUTION / NOTICE / HINT

HINT:
·

Use the following procedure to troubleshoot the pre-crash safety system.

·

*: Use the GTS.



PROCEDURE

1.VEHICLE BROUGHT TO WORKSHOP
Result:
Proceed to
NEXT



NEXT

2.CUSTOMER PROBLEM ANALYSIS AND SYMPTOM CHECK
2.CUSTOMER PROBLEM ANALYSIS AND SYMPTOM CHECK
Pre-crash Safety System Customer Problem Analysis Vehicle Brought to Workshop
Year Month Day
Dealer name Person in charge at headquarters Telephone number
Shop name Person in charge at shop
Frame type Frame No. First Registered Year Total distance traveled
Customer Concerns
(Include details)
Does not operate
Operates abnormally
Date of malfunction occurrence
(Since when)
Year Month Day Approx. Time
Date of last inspection Year Month Day
Frequency of problem symptoms Once / Occasionally (times per day, times per month) / Every time certain conditions are met ( )
Weather Sunny / Cloudy / Rain (Heavy/Light) / Snow (Amount of snowfall cm) / Other ( ) Vehicle speed Approximately ( ) km/h
Place Prefecture
(Attach a map if possible)
Driving path (where vehicle turned, where driver attempted to drive to, etc.)
* Describe the conditions immediately after the occurrence in as much detail as possible.
Conditions of Occurrence Diagram
E346505E01
0.781,1.458 0.688,0.583 0.688,0.583 0.844,0.583 true 1.385,1.396 1.76,0.854 1.76,0.854 1.917,0.854 true 1.885,1.427 2.448,1.521 2.448,1.521 2.448,1.708 true 1.604,1.781 1.969,2.469 1.969,2.469 2.125,2.469 true 1.438,2.177 1.729,2.927 1.729,2.927 1.885,2.927 true 0.698,2.833 1.125,1.906 true 0.688,0.073 1.865,0.271 1.177,0.198 10 false Diagram Example 0.896,0.5 2.021,0.677 1.125,0.177 10 false Oncoming vehicle 1.031,0.823 1.427,0.99 0.396,0.167 10 false North 1.969,0.771 2.979,0.979 1.01,0.208 10 false Stopped vehicle 2.104,1.698 3.083,2.052 0.979,0.354 10 false Approximately ( ) m 0.313,2.844 1.25,3.021 0.938,0.177 10 false Occurred here 2.177,2.385 2.698,2.583 0.521,0.198 10 false Vehicle 1.927,2.844 2.542,3.042 0.615,0.198 10 false Guardrail

Surrounding road conditions
Describe whether there were any billboards, metal objects on the road (manholes), guardrails, pipes, cat's eyes, gate bars, etc.
Urban area / Suburbs / Highway / Other ( ) Road surface conditions Temperature About °C ( °F)
Direction of travel Straight / Right turn / Left turn / Right curve / Left curve Snow wall(s) Y / N
Driving lane Number of lanes on one side (lanes) / ( ) lane(s) from left Backlighting Y / N
Condition of external area around detection sensor No foreign matter adhesion / Foreign matter adhesion (water, snow, ice, other)
Additional information about condition of vehicle exterior
(other than above)
DTC First Time (when vehicle brought to workshop)
Second Time (after clearing DTC)
Status of operation switch Pre-crash safety system cancel switch Far / Medium / Near / OFF VSC OFF switch ON / OFF
Serial number of main part
* Fill in when removing, installing or replacing part
Forward recognition Camera
Describe the items to the right in as much detail as possible. Driver operation Accelerator pedal operated / Brake pedal operated / Steering wheel operated Time elapsed after engine is started Approximately ( ) minutes
Tire pressure inspection result Front: LH ( ) kPa RH ( ) kPa Standard ( ) kPa
Rear: LH ( ) kPa RH ( ) kPa Standard ( ) kPa
Sensor optical axis inspection result Forward recognition camera Accident history Y / N
Millimeter wave radar sensor assembly Accident history Y / N
Vehicle modified Y ( ) / N
Items installed or attached around windshield glass Drive recorder* / Radar detector / Navigation unit (genuine/non-genuine) / ETC / Charms or toys / Other:
*: Since this device holds information valuable to the investigation, make sure to retrieve this device if permission is granted by the customer.

Result:
Proceed to
NEXT



NEXT

3.INSPECT BATTERY VOLTAGE
3.INSPECT BATTERY VOLTAGE
a.

Measure the battery voltage with the engine switch off.

Standard voltage:

11 to 14 V


If the voltage is below 11 V, recharge or replace the battery before proceeding to the next step.


Result:
Proceed to
OK
NG



OK

4.INSPECT MILLIMETER WAVE RADAR SENSOR ASSEMBLY (BEAM AXIS MISALIGNMENT READING)*

NG

CHARGE OR REPLACE BATTERY

4.INSPECT MILLIMETER WAVE RADAR SENSOR ASSEMBLY (BEAM AXIS MISALIGNMENT READING)*


c.

Connect the GTS to the DLC3.


d.

Turn the engine switch on (IG).


e.

Turn the GTS on.


f.

Enter the following menus: Body Electrical / Pre-Crash 2 / Utility / Front Beam Axis Misalignment Reading.


g.

Check the amount of misalignment and make a note.


h.

Enter the following menus: Body Electrical / Pre-Crash 2 / Utility / Front Beam Axis Offset Reading.


i.

Check the amount of offset and make a note.


Result:
Proceed to
NEXT



NEXT

5.CHECK CAN COMMUNICATION SYSTEM*
5.CHECK CAN COMMUNICATION SYSTEM*

Result:
DTC Condition Proceed to
CAN DTC is not output A
CAN DTC is output (for LHD (w/ Central Gateway ECU)) B
CAN DTC is output (for RHD (w/ Central Gateway ECU)) C



A

6.INSPECT WARNING LIGHT

B

C

6.INSPECT WARNING LIGHT
a.

Check the condition of the warning lights on the combination meter assembly.


Result:
Result Proceed to
Warning lights other than the PCS warning light are not illuminated or flashing A
Warning lights other than the PCS warning light are illuminated or flashing B



A

7.INSPECT MULTI-INFORMATION DISPLAY

B

GO TO MALFUNCTIONING SYSTEM

7.INSPECT MULTI-INFORMATION DISPLAY
a.

Check if a pre-crash safety system warning message is displayed on the multi-information display in the combination meter assembly.


Result:
DTC Condition Proceed to
"Pre-crash Safety Malfunction Visit Your Dealer" is displayed A
"Pre-crash Safety Unavailable", "Pre-crash Safety Unavailable Clean Sensor". "Forward Camera Systems Unavailable Clean Windshield" or "Forward Camera Systems Unavailable" is displayed B
Warning message is not displayed C



A

8.CHECK FOR DTC*

B

C

CHECK CONDITIONS WHEN PRE-CRASH SAFETY SYSTEM DID NOT OPERATE

8.CHECK FOR DTC*
a.

b.

Clear the DTCs.


c.

Recheck for DTCs.

i.

Attempt to duplicate the malfunction and check if the DTCs are output again.

Click hereVehicle Interior>PRE-CRASH SAFETY>PRE-CRASH SAFETY SYSTEM>DTC CHECK / CLEAR



Result:
DTC Condition Proceed to
DTCs are not output A
DTCs are output B
No DTCs are output, and malfunction cannot be duplicated or checked C



A

9.PROBLEM SYMPTOMS TABLE

B

C

9.PROBLEM SYMPTOMS TABLE

Result:
Result Proceed to
Fault is not listed in Problem Symptoms Table A
Fault is listed in Problem Symptoms Table B



A

10.OVERALL ANALYSIS AND TROUBLESHOOTING*

B

9.PROBLEM SYMPTOMS TABLE
10.OVERALL ANALYSIS AND TROUBLESHOOTING*

NEXT

11.ADJUST, REPAIR OR REPLACE
11.ADJUST, REPAIR OR REPLACE
Result:
Proceed to
NEXT



NEXT

12.CONFIRMATION TEST
12.CONFIRMATION TEST
Result:
Proceed to
NEXT



NEXT

END