1. PRECAUTION
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal.
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION
2.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
51442 3.REMOVE NO. 2 ENGINE UNDER COVER
4.DRAIN ENGINE COOLANT
16571C 5.REMOVE NO. 1 RADIATOR HOSE
16572D 6.REMOVE NO. 2 RADIATOR HOSE
16711 7.REMOVE FAN SHROUD
8.REMOVE AIR CLEANER CAP WITH AIR CLEANER HOSE
16323 9.REMOVE WATER INLET HOUSING
| *1 | Oil Cooler Hose |
| *2 | No. 2 Oil Cooler Hose |
Slide the 2 clips and disconnect the oil cooler hose and No. 2 oil cooler hose from the water inlet housing.
| *1 | Water By-pass Hose |
| *2 | No. 2 Water By-pass Hose |
| *3 | No. 3 Water By-pass Hose |
| *4 | No. 4 Water By-pass Hose |
| *5 | No. 5 Water By-pass Hose |
Slide the 2 clips and disconnect the No. 4 water by-pass hose and No. 5 water by-pass hose from the water inlet housing.
Slide the clip and disconnect the No. 2 water by-pass hose from the water inlet housing.
Slide the 2 clips and disconnect the water by-pass hose from the water inlet housing and union.
Slide the clip and disconnect the No. 3 water by-pass hose from the water inlet housing.
Remove the 5 bolts and water inlet housing.
Remove the gasket from the No. 1 water outlet pipe.
Remove the gasket from the engine water pump assembly.
16604 10.REMOVE NO. 2 IDLER PULLEY SUB-ASSEMBLY
27020 11.REMOVE GENERATOR ASSEMBLY
16620 12.REMOVE V-RIBBED BELT TENSIONER ASSEMBLY
16631B 13.REMOVE IDLER PULLEY BRACKET (w/o Air Conditioning System)
Remove the 3 bolts and idler pulley assembly.
88320 14.DISCONNECT COOLER COMPRESSOR ASSEMBLY (w/ Air Conditioning System)
16100 15.REMOVE ENGINE WATER PUMP ASSEMBLY
Remove the 17 bolts, engine water pump assembly and gasket.