| *1 | FC AIR BY-PASS VALVE PIPE ASSEMBLY | *2 | WIRE HARNESS CLAMP BRACKET |
| *3 | STUD BOLT | - | - |
| ● | Non-reusable part | - | - |
51420A
2.REMOVE FRONT COMPARTMENT UNDER COVER ASSEMBLY
58404B
3.REMOVE REAR NO. 4 FLOOR BOARD SUB-ASSEMBLY
17D10
4.REMOVE FC STACK AIR OUTLET HOSE ASSEMBLY
To prevent contamination by foreign matter or water droplets, cover the connecting portions of the FC stack air outlet hose and each pipe with plastic bags.
17C90
5.REMOVE FC AIR BY-PASS VALVE ASSEMBLY
To prevent contamination by foreign matter or water droplets, cover the connecting portions of the FC air by-pass valve assembly, FC air by-pass valve pipe assembly and intercooler with sensor assembly with protective tape.