Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING SYSTEM › from 2013.12
RM2170E _58 Vehicle Interior _057042 HEATING / AIR CONDITIONING _0278125 AIR CONDITIONING SYSTEM C

HEATING / AIR CONDITIONING  AIR CONDITIONING SYSTEM  B1497/97  BUS IC Communication Malfunction  


DESCRIPTION

The air conditioning harness assembly connects the air conditioning amplifier assembly and the servo motors. The air conditioning amplifier assembly supplies power and sends operation instructions to each servo motor through the air conditioning harness assembly. Each servo motor sends damper position information to the air conditioning amplifier assembly.

DTC No. DTC Detection Condition Trouble Area
B1497/97 Error or open in communication line
·

Air conditioning harness assembly

·

No. 1 air conditioning radiator damper servo sub-assembly

·

No. 2 air conditioning radiator damper servo sub-assembly

·

No. 1 blower damper servo sub-assembly

·

Air conditioning amplifier assembly



WIRING DIAGRAM

E233245E08
4.573,2.125 7.021,2.469 2.448,0.344 10 false No. 1 Air Conditioning Radiator Damper Servo Sub-assembly (Air Mix) 0.302,2.771 1.927,3.104 1.625,0.333 10 false Air Conditioning Amplifier Assembly 4.646,0.458 6.052,0.656 1.406,0.198 10 false from Auxiliary Battery 1.906,0.479 2.198,0.646 0.292,0.167 10 false G34 2.99,0.594 3.844,0.76 0.854,0.167 10 false ECU-B NO. 2 1.958,0.292 2.135,0.458 0.177,0.167 10 false 21 1.99,0.896 2.094,1.063 0.104,0.167 10 false 4 1.99,1.281 2.094,1.448 0.104,0.167 10 false 3 1.99,1.677 2.094,1.844 0.104,0.167 10 false 2 1.958,1.073 2.219,1.24 0.26,0.167 10 false z1 1.958,1.458 2.219,1.625 0.26,0.167 10 false z1 1.958,1.854 2.198,2.021 0.24,0.167 10 false z1 1.396,1.844 1.885,2.01 0.49,0.167 10 false BUS G 1.542,1.448 1.875,1.615 0.333,0.167 10 false BUS 1.396,1.063 1.906,1.229 0.51,0.167 10 false B BUS 3.313,0.979 3.75,1.146 0.438,0.167 10 false BBUS 3.313,1.365 3.646,1.531 0.333,0.167 10 false BUS 3.313,1.75 3.74,1.917 0.427,0.167 10 false BUSG 1.75,0.469 1.875,0.635 0.125,0.167 10 false B 4.76,5.906 6.542,6.25 1.781,0.344 10 false No. 1 Blower Damper Servo Sub-assembly (Air Inlet) 4.573,4.042 7.083,4.385 2.51,0.344 10 false No. 2 Air Conditioning Radiator Damper Servo Sub-assembly (Air Outlet)

CAUTION / NOTICE / HINT

NOTICE:

Inspect the fuses for circuits related to this system before performing the following inspection procedure.


PROCEDURE

1.PERFORM ACTIVE TEST USING INTELLIGENT TESTER
a.

Connect the intelligent tester to the DLC3.


b.

Turn the power switch on (IG).


c.

Turn the intelligent tester on.


d.

Enter the following menus: Body / Air Conditioner / Active test.


e.

Check the operation by referring to the table below.

Air Conditioner
Tester Display Test Part Control Range Diagnostic Note
Air Mix Servo Targ Pulse(D) No. 1 air conditioning radiator damper servo sub-assembly (air mix) pulse Min.: 128, Max.: 383 Operates between 173 and 257 pulses
Air Outlet Servo Pulse (D) No. 2 air conditioning radiator damper servo sub-assembly (air outlet) pulse Min.: 128, Max.: 383 Operates between 206 and 267 pulses
Air Inlet Damper Targ Pulse No. 1 blower damper servo sub-assembly (air inlet) pulse Min.: 128, Max.: 383 Operates between 254 and 287 pulses

OK:

Arm of the damper servo motor selected in the Active Test moves smoothly.



f.

According to the test result, proceed to the next step.

Result:
Result Proceed to
One of the damper servo motors is malfunctioning A
All of the damper servo motors are malfunctioning B




A

2.SYSTEM CHECK

B

6.REPLACE AIR CONDITIONING HARNESS ASSEMBLY
2.SYSTEM CHECK
a.

According to the test result, proceed to the next step.

Result:
Result Proceed to
Only the No. 1 air conditioning radiator damper servo sub-assembly (air mix) is malfunctioning A
Only the No. 2 air conditioning radiator damper servo sub-assembly (air outlet) is malfunctioning B
Only the No. 1 blower damper servo sub-assembly (air inlet) is malfunctioning C




A

3.REPLACE NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY (AIR MIX)

B

4.REPLACE NO. 2 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY (AIR OUTLET)

C

5.REPLACE NO. 1 BLOWER DAMPER SERVO SUB-ASSEMBLY (AIR INLET)
3.REPLACE NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY (AIR MIX)
a.

Replace the No. 1 air conditioning radiator damper servo sub-assembly (air mix) (See page Vehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING UNIT>DISASSEMBLY).

HINT:

Since the servo motor cannot be inspected while it is removed from the vehicle, replace the servo motor with a new or known good one and check that the condition returns to normal.



b.

Check for the DTC.

Result:
Result Proceed to
DTC B1497/97 is not output A
DTC B1497/97 is output B




A

END

B

6.REPLACE AIR CONDITIONING HARNESS ASSEMBLY
4.REPLACE NO. 2 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY (AIR OUTLET)
a.

Replace the No. 2 air conditioning radiator damper servo sub-assembly (air outlet) (See page Vehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING UNIT>DISASSEMBLY).

HINT:

Since the servo motor cannot be inspected while it is removed from the vehicle, replace the servo motor with a new or known good one and check that the condition returns to normal.



b.

Check for the DTC.

Result:
Result Proceed to
DTC B1497/97 is not output A
DTC B1497/97 is output B




A

END

B

6.REPLACE AIR CONDITIONING HARNESS ASSEMBLY
5.REPLACE NO. 1 BLOWER DAMPER SERVO SUB-ASSEMBLY (AIR INLET)
a.

Replace the No. 1 blower damper servo sub-assembly (air inlet) (See page Vehicle Interior>HEATING / AIR CONDITIONING>BLOWER UNIT>DISASSEMBLY).

HINT:

Since the servo motor cannot be inspected while it is removed from the vehicle, replace the servo motor with a new or known good one and check that the condition returns to normal.



b.

Check for the DTC.

Result:
Result Proceed to
DTC B1497/97 is not output A
DTC B1497/97 is output B




A

END

B

6.REPLACE AIR CONDITIONING HARNESS ASSEMBLY
6.REPLACE AIR CONDITIONING HARNESS ASSEMBLY
a.

Replace the air conditioning harness assembly (See page Vehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING UNIT>REMOVAL).

HINT:

Since the air conditioning harness assembly cannot be inspected while it is removed from the vehicle, replace the air conditioning harness assembly with a new or known good one and check that the condition returns to normal.



b.

Check for the DTC.

Result:
Result Proceed to
DTC B1497/97 is not output A
DTC B1497/97 is output B




A

END

B

7.CHECK HARNESS AND CONNECTOR (POWER SOURCE CIRCUIT)
7.CHECK HARNESS AND CONNECTOR (POWER SOURCE CIRCUIT)
a.

Disconnect the G34 air conditioning amplifier assembly connector.


b.

Measure the voltage according to the value(s) in the table below.

Standard Voltage:
Tester Connection Condition Specified Condition
G34-21 (B) - Body ground Power switch off 11 to 14 V




OK

REPLACE AIR CONDITIONING AMPLIFIER ASSEMBLY

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR