Home › Engine / Hybrid System › 2ZR-FXE (ENGINE MECHANICAL) › ENGINE UNIT › from 2012.10
RM2070E _51 Engine / Hybrid System _061907 2ZR-FXE ENGINE MECHANICAL _0301599 ENGINE UNIT A

2ZR-FXE ENGINE MECHANICAL  ENGINE UNIT  INSTALLATION  


PROCEDURE

Hide 12261 2.INSTALL VENTILATION HOSE

a.

Install the ventilation hose to the ventilation valve.


Hide 17167 4.INSTALL NO. 1 EXHAUST MANIFOLD HEAT INSULATOR

Hide 23807V 6.INSTALL NO. 1 DELIVERY PIPE SPACER

Hide 23807 7.INSTALL FUEL DELIVERY PIPE SUB-ASSEMBLY

Hide 23818 8.INSTALL FUEL VAPOR FEED PIPE

a.

Install the fuel vapor feed pipe with the bolt.

Torque:
43 N*m (438 kgf*cm, 32 ft.*lbf)


Hide 25620 10.INSTALL EGR VALVE WITH COOLER ASSEMBLY

Hide 11409 12.INSTALL ENGINE OIL LEVEL DIPSTICK GUIDE

a.

Apply a light coat of engine oil to a new O-ring.


b.

Install the O-ring to the engine oil level dipstick guide.


c.
A213046E04
2.188,0.229 2.323,0.406 0.135,0.177 10 true A 2.25,1.01 2.385,1.177 0.135,0.167 10 true B

Install the engine oil level dipstick guide with the 2 bolts.

Torque:
Bolt A : 28 N*m (286 kgf*cm, 21 ft.*lbf)
Bolt B : 21 N*m (214 kgf*cm, 15 ft.*lbf)


d.

Connect the clamp to the engine oil level dipstick guide.


e.

Install the oil dipstick.


Hide 14.INSTALL ENGINE HANGERS

a.
A214905

Install the 2 engine hangers with the 2 bolts.

Torque:
43 N*m (438 kgf*cm, 32 ft.*lbf)

Part Name Part No.
No. 1 engine hanger 12281-37021
12281-37070
12281-0T040
No. 2 engine hanger 12282-37011
12282-37060
12282-0T040
Bolt 91552-81050
90105-W0204


Hide 15.REMOVE ENGINE STAND

a.

Remove the engine from the engine stand.