Home › Power Source / Network › POWER DISTRIBUTION › MAIN BODY ECU › from 2016.05
RM2070E _57 Power Source / Network _061935 POWER DISTRIBUTION _0301750 MAIN BODY ECU A

POWER DISTRIBUTION  MAIN BODY ECU  INSTALLATION  


PROCEDURE

Hide 89221 1.INSTALL MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)

NOTICE:
·

Make sure that no foreign matter gets on the connecting surfaces.

·

Do not touch the ECU connector.



a.
E190840E03
1.125,1.385 0.417,1.031 true 0.24,0.958 0.469,1.167 0.229,0.208 10 false *1 0.583,2.615 0.813,2.823 0.229,0.208 10 false *a

Insert the main body ECU (multiplex network body ECU) up to the position where it contacts the housing sidewall of the guide as shown in the illustration.

Text in Illustration
*1 Housing Sidewall
*a 20° or more

HINT:

Make sure to keep the angle 20° or more as shown in the illustration.



b.
E190841E03
0.5,0.781 1.135,1.354 true 2.167,1.323 2.302,2.385 true 0.323,0.677 0.573,0.875 0.25,0.198 10 false *1 2.229,2.417 2.51,2.656 0.281,0.24 10 false *2

Slide the guide of the main body ECU (multiplex network body ECU) along the housing sidewall so that it contacts the junction block fuses as shown in the illustration.

Text in Illustration
*1 Housing Sidewall
*2 Junction Block Fuse


c.
E190842E02
2.798,0.359 3.002,0.562 0.203,0.203 10 *1 2.223,1.07 2.785,0.457 false

While keeping the main body ECU (multiplex network body ECU) in contact with side A of the junction block (axis of rotation), rotate it downward as shown in the illustration.

Text in Illustration
*1 Side A Contact Portion


d.
E190843E02
1.456,1.839 1.649,2.031 0.193,0.192 10 *1 1.539,1.819 2.004,1.124 false

Press the push area until the claw engages to install the main body ECU (multiplex network body ECU).

Text in Illustration
*1 Push Area

NOTICE:
·

Make sure to press only the push area.

·

Confirm the engagement of the main body ECU (multiplex network body ECU) and junction block by listening for the lock sound.



HINT:

If a lock sound cannot be heard, visually check the lock part engagement. The engagement can also be confirmed if the main body ECU (multiplex network body ECU) and junction block are flush.



Hide 2.INSTALL INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY

a.
E190816

Engage the claw to connect the connector as shown in the illustration.

NOTICE:

Be sure to engage the claw securely.



b.
E190814

Engage the claw to lock the connector lock as shown in the illustration.


c.
E190812

Engage the claw to connect the connector as shown in the illustration.

NOTICE:

Be sure to engage the claw securely.



d.

for LHD:

i.

Engage the 2 claws to connect the wiring harness protector.


ii.

Install the instrument panel junction block assembly with the bolt and nut.


iii.
E190809

Engage the claw to connect the connector as shown in the illustration.

NOTICE:

Be sure to engage the claw securely.



iv.
E190807

Engage the claw to connect the connector as shown in the illustration.

NOTICE:

Be sure to engage the claw securely.



v.

Connect each connector.



e.

for RHD:

i.

Engage the clamp.


ii.

Install the instrument panel junction block assembly with the bolt and nut.


iii.

Engage the clamp.


iv.

Connect each connector.


v.
E190825

Engage the 2 claws to connect the 2 connectors as shown in the illustration.



Hide 55480D 3.INSTALL LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY (for LHD)

Hide 55606 4.INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for LHD)

Hide 55550 6.INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY (for RHD)

HINT:

Use the same procedure as for LHD (See page Vehicle Interior>INTERIOR PANELS / TRIM>LOWER INSTRUMENT PANEL>INSTALLATION).


Hide 55607 7.INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for RHD)

HINT:

Use the same procedure as for LHD (See page Vehicle Interior>INTERIOR PANELS / TRIM>LOWER INSTRUMENT PANEL>INSTALLATION).


Hide 8.CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).