1. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM (for HFC-134a(R134a))
2. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM (for HFO-1234yf(R1234yf))
3.REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY
55736D
4.REMOVE COWL BODY MOUNTING REINFORCEMENT LH (for LHD)
55701J
5.REMOVE OUTER COWL TOP PANEL SUB-ASSEMBLY (for LHD)
55735C
6.REMOVE COWL BODY MOUNTING REINFORCEMENT RH (for RHD)
55701J
7.REMOVE OUTER COWL TOP PANEL SUB-ASSEMBLY (for RHD)
88707
8.DISCONNECT SUCTION PIPE SUB-ASSEMBLY
88710E
9.DISCONNECT AIR CONDITIONER TUBE AND ACCESSORY ASSEMBLY
88515
10.REMOVE COOLER EXPANSION VALVE
Using a 4 mm hexagon socket wrench, remove the 2 hexagon bolts.
Temporarily install the bolt for the suction pipe sub-assembly halfway to the cooler expansion valve.
| *a | Bolt for Suction Pipe Sub-assembly |
Hold the bolt and pull it to remove the cooler expansion valve as shown in the illustration.
Remove the 2 O-rings from the No. 1 cooler evaporator sub-assembly.
| *1 | No. 1 Cooler Evaporator Sub-assembly |