Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING UNIT › 2013.08–2014.11
RM2070E _58 Vehicle Interior _061946 HEATING / AIR CONDITIONING _0301840 AIR CONDITIONING UNIT A

HEATING / AIR CONDITIONING  AIR CONDITIONING UNIT  REMOVAL  


PROCEDURE

Hide 1. PRECAUTION

NOTICE:

Make sure to select DEF mode before disconnecting the cable from the negative (-) auxiliary battery terminal.


Hide 2. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM (for HFC-134a(R134a))

Hide 3. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM (for HFO-1234yf(R1234yf))

Hide 4.REMOVE WINDSHIELD WIPER MOTOR AND LINK

Hide 55736D 5.REMOVE COWL BODY MOUNTING REINFORCEMENT LH (for LHD)

Hide 55701J 6.REMOVE OUTER COWL TOP PANEL SUB-ASSEMBLY (for LHD)

Hide 55735C 7.REMOVE COWL BODY MOUNTING REINFORCEMENT RH (for RHD)

Hide 55701J 8.REMOVE OUTER COWL TOP PANEL SUB-ASSEMBLY (for RHD)

Hide 88707 9.DISCONNECT SUCTION PIPE SUB-ASSEMBLY

a.
E223809

Remove the bolt and slide the hook connector.


b.

Disconnect the suction pipe sub-assembly.


c.

Remove the O-ring from the suction pipe sub-assembly.

NOTICE:

Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.



Hide 88710E 10.DISCONNECT AIR CONDITIONER TUBE AND ACCESSORY ASSEMBLY

a.

Disconnect the air conditioner tube and accessory assembly.


b.

Remove the O-ring from the air conditioner tube and accessory assembly.

NOTICE:

Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.



Hide 87245A 11.DISCONNECT INLET HEATER WATER HOSE A

a.
E223811

Using pliers, grip the claws of the clip and slide the clip to disconnect the inlet heater water hose A.

NOTICE:
·

Do not apply excessive force to the inlet heater water hose A.

·

Prepare a drain pan or cloth in case the coolant leaks.




Hide 87246A 12.DISCONNECT OUTLET HEATER WATER HOSE A

a.
E223812

Using pliers, grip the claws of the clip and slide the clip to disconnect the outlet heater water hose A.

NOTICE:
·

Do not apply excessive force to the outlet heater water hose A.

·

Prepare a drain pan or cloth in case the coolant leaks.




Hide 55303B 13.REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY

Hide 14.REMOVE STEERING POST ASSEMBLY

Hide 82730 18.REMOVE INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY

Hide 85940 19.REMOVE WINDSHIELD WIPER RELAY ASSEMBLY (w/ Rain Sensor)

Hide 55309C 20.REMOVE CENTER INSTRUMENT PANEL REINFORCEMENT SUB-ASSEMBLY

a.
E232981

Disengage the clamp.


b.

Remove the 2 nuts and center instrument panel reinforcement sub-assembly.


Hide 88625Q 21.REMOVE COOLER THERMISTOR (ROOM TEMPERATURE SENSOR)

a.
E246542

Disconnect the aspirator and connector, and remove the cooler thermistor (room temperature sensor).


Hide 55377A 22.REMOVE NO. 2 INSTRUMENT PANEL MOUNTING BRACKET

a.
E228517

Using a clip remover, remove the clip and turn back the floor carpet.


b.
E228518

Remove the bolt and 2 nuts, and No. 2 instrument panel mounting bracket.


Hide 55306A 23.REMOVE NO. 1 INSTRUMENT PANEL BRACE SUB-ASSEMBLY

a.
E250079

Disengage the 4 clamps.


b.
E250916

Remove the screw, nut, and No. 1 instrument panel brace sub-assembly.


Hide 55376 24.REMOVE NO. 1 INSTRUMENT PANEL MOUNTING BRACKET

a.
E228513

Using a clip remover, remove the clip and turn back the floor carpet.


b.
E228514

Remove the 2 bolts, 2 nuts, and No. 1 instrument panel mounting bracket.


Hide 55307C 25.REMOVE NO. 2 INSTRUMENT PANEL BRACE SUB-ASSEMBLY

a.
E228526E03
1.01,0.375 1.125,0.281 false 1.177,0.167 1.385,0.354 0.208,0.188 10 true *1

Remove the bolt and disconnect the earth wire.

Text in Illustration
*1 Earth Wire


b.

Remove the bolt.


c.

Disengage the clamp.


d.
E228519

Remove the 2 bolts.


e.

Disengage the 3 clamps.


f.
E228520E03
2.813,0.896 2.708,0.885 false 2.542,0.771 2.729,0.979 0.188,0.208 10 true *1

Remove the bolt and disconnect the earth wire.

Text in Illustration
*1 Earth Wire


g.

Disengage the 3 clamps.


h.
E250917

Remove the screw, nut, and No. 2 instrument panel brace sub-assembly.


Hide 55990B 26.REMOVE LOWER DEFROSTER NOZZLE ASSEMBLY

a.
E228522

Disengage the 2 clamps.


b.
E228523

Using a clip remover, remove the 2 clips.


c.
E228524

Disengage the 2 claws and guide, and remove the lower defroster nozzle assembly.


Hide 87212 27.REMOVE REAR NO. 1 AIR DUCT

a.
E250081

Disengage the clamp.


b.

Disengage the 8 claws and remove the rear No. 1 air duct.


Hide 55330B 28.REMOVE INSTRUMENT PANEL REINFORCEMENT ASSEMBLY

a.
E228527

Remove the bolt.


b.

Disengage the 3 clamps.


c.
E232982

Disengage the 2 clamps.


d.
E250080E02
0.875,2.833 0.969,3 true 0.906,3.01 1.094,3.208 0.188,0.198 10 true *1

Remove the bolt and disconnect the earth wire.

Text in Illustration
*1 Earth Wire


e.

Remove the 2 bolts.


f.

Disengage the 4 clamps.


g.

Disconnect the center airbag sensor connector from the center airbag sensor assembly as shown in the illustration.

E250082E01
5.492,1.891 5.644,2.047 0.151,0.156 10 *1 5.646,1.981 5.961,2.13 false

Text in Illustration
*1 Center Airbag Sensor Connector - -


h.

Disengage the 2 clamps.


i.

Disconnect each connector.


j.

Remove the 9 bolts and instrument panel reinforcement assembly.

E228529


Hide 29.REMOVE AIR CONDITIONING UNIT ASSEMBLY

NOTICE:
·

Be sure to support the air conditioning unit assembly when removing it because failure to do so may cause brackets of the air conditioning unit assembly to break.

·

When disassembling the air conditioning unit, eliminate static electricity by touching the vehicle body to prevent the components from being damaged.



a.
E280000

Disconnect the No. 1 cooler unit drain hose.


b.

Remove the bolt, nut and air conditioning unit assembly.