Home › Vehicle Exterior › DOOR / HATCH › BACK DOOR › from 2016.05
RM2070E _59 Vehicle Exterior _061950 DOOR / HATCH _0301881 BACK DOOR A

DOOR / HATCH  BACK DOOR  REASSEMBLY  


PROCEDURE

Hide 68961 1.INSTALL BACK DOOR STAY BOLT LH

Hide 68961 2.INSTALL BACK DOOR STAY BOLT RH

HINT:

Use the same procedure as for the LH side.


Hide 68960 3.INSTALL BACK DOOR STAY ASSEMBLY LH

Hide 68950C 4.INSTALL BACK DOOR STAY ASSEMBLY RH

HINT:

Use the same procedure as for the LH side.


Hide 86790D 5.INSTALL REAR TELEVISION CAMERA ASSEMBLY (w/ Rear Monitor)

Hide 85110R 6.INSTALL REAR WIPER MOTOR ASSEMBLY

Hide 85143R 7.INSTALL REAR WIPER MOTOR GROMMET

Hide 8.INSTALL REAR WIPER ARM AND BLADE ASSEMBLY

Hide 85292A 9.INSTALL REAR WIPER ARM HEAD CAP

Hide 81270 14.INSTALL LICENSE PLATE LIGHT ASSEMBLY LH

Hide 81270 15.INSTALL LICENSE PLATE LIGHT ASSEMBLY RH

HINT:

Use the same procedure as for the LH side.


Hide 76801 16.INSTALL BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY

Hide 69350 17.INSTALL BACK DOOR LOCK ASSEMBLY

Hide 67372A 18.INSTALL BACK DOOR WEIGHT

a.
B314407

Engage the guide.


b.

Install the back door weight with the 3 bolts.


Hide 67837N 19.INSTALL BACK DOOR DUST PROOF SEAL

a.
B442207

Engage the 2 claws to install the 2 back door dust proof seals.


Hide 67005B 20.INSTALL BACK DOOR PANEL CUSHION

a.
B276141

Engage the 2 claws to install 2 new back door panel cushions.


Hide 67750 21.INSTALL BACK DOOR TRIM BOARD ASSEMBLY

a.
B276139

Engage the guide and 14 clips to install the back door trim board assembly.


b.
B284805

Engage the 3 guides and 3 claws to install the back door service hole cover LH.

HINT:

Use the same procedure for both the RH and LH sides.



c.
B281891

Engage the 2 guides and 2 claws to install the back door hole cover.


Hide 67938A 22.INSTALL BACK DOOR SIDE GARNISH LH

a.
B276137

Engage the 2 claws and 2 clips to install the back door side garnish LH.


Hide 67937B 23.INSTALL BACK DOOR SIDE GARNISH RH

a.
B276136

Engage the 2 claws and 2 clips to install the back door side garnish RH.


Hide 67939B 24.INSTALL BACK DOOR CENTER GARNISH

a.
B276135

Engage the 4 claws and 4 clips to install the back door center garnish.


Hide 74811B 25.INSTALL DOOR PULL HANDLE

a.
B316123

Engage the 4 claws to install the door pull handle.

HINT:

With the back door fully open, install the door pull handle so that the arrow on the backside of the handle points up.



Hide 64886 26.INSTALL BACK WINDOW GLASS CHANNEL LH

a.
B275262

Engage the grommet and clip to install the back window glass channel LH.


Hide 64885A 27.INSTALL BACK WINDOW GLASS CHANNEL RH

a.
B275261

Engage the grommet and clip to install the back window glass channel RH.


Hide 28.ADJUST REAR TELEVISION CAMERA OPTICAL AXIS (CAMERA POSITION SETTINGS) (w/ Intelligent Parking Assist System)