DTC B2064 Vehicle Type Signal Malfunction |
| DTC No. | DTC Detection Condition | Trouble Area |
| B2064 | Communication with the main body ECU is normal and received steering wheel position information is not set (three times in succession). |
|
| 1.CHECK DTC OUTPUT (CAN COMMUNICATION SYSTEM) |
Clear the DTCs (Click here).
Recheck for DTCs.
|
| ||||
| OK | |
| 2.CHECK DTC OUTPUT (PRE-COLLISION SYSTEM) |
Using the Techstream, enter the following menus: Body Electrical / Pre-Collision / Trouble Codes.
Clear the DTCs (Click here).
Recheck for DTCs.
|
| ||||
| OK | ||
| ||
| 3.REPLACE MAIN BODY ECU |
Replace the main body ECU (Click here).
| NEXT | |
| 4.CHECK DTC OUTPUT (PRE-COLLISION SYSTEM) |
Using the Techstream, enter the following menus: Body Electrical / Pre-Collision / Trouble Codes.
Clear the DTCs (Click here).
Recheck for DTCs.
|
| ||||
| OK | ||
| ||