DTC C1A46 Yaw Rate Sensor |
| DTC No. | DTC Detection Condition | Trouble Area |
| C1A46 | When the vehicle speed is 5 km/h (3 mph) or more, a yaw rate sensor malfunction signal is received from the brake booster with master cylinder (skid control ECU). |
|
| 1.CHECK DTC OUTPUT (ELECTRONICALLY CONTROLLED BRAKE SYSTEM) |
Check DTCs for the electronically controlled brake system (Click here).
|
| ||||
| OK | |
| 2.REPLACE BRAKE BOOSTER WITH MASTER CYLINDER |
Replace the brake booster with master cylinder (skid control ECU) (Click here).
| NEXT | |
| 3.CHECK DTC OUTPUT (PRE-COLLISION SYSTEM) |
Using the Techstream, enter the following menus: Body Electrical / Pre-Collision 2 / Trouble Codes.
Clear the DTCs (Click here).
Driver the vehicle.
Recheck for DTCs.
|
| ||||
| OK | ||
| ||