Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING SYSTEM
RM3210E _58 Vehicle Interior _047534 HEATING / AIR CONDITIONING _0244634 AIR CONDITIONING SYSTEM C

HEATING / AIR CONDITIONING  AIR CONDITIONING SYSTEM  B1448/48  Passenger Side FACE Servo Motor Circuit  


DESCRIPTION

for LHD

The No. 1 air conditioning radiator damper servo sub-assembly sends pulse signals to inform the air conditioning amplifier assembly of the damper position. The air conditioning amplifier assembly activates the motor (normal or reverse) based on these signals to move the air outlet damper to the appropriate position, which controls the air outlet switching.

The air conditioning amplifier assembly communicates with the servo through a communication/driver IC and wiring assembly called the air conditioning harness assembly.


for RHD

The No. 2 air conditioning radiator damper servo sub-assembly sends pulse signals to inform the air conditioning amplifier assembly of the damper position. The air conditioning amplifier assembly activates the motor (normal or reverse) based on these signals to move the air outlet damper to the appropriate position, which controls the air outlet switching.

The air conditioning amplifier assembly communicates with the servo through a communication/driver IC and wiring assembly called the air conditioning harness assembly.


DTC No. Detection Item DTC Detection Condition Trouble Area Memory
B1448/48 Passenger Side FACE Servo Motor Circuit
for LHD:

Air outlet damper position sensor value does not change even if air conditioning amplifier assembly operates No. 1 air conditioning radiator damper servo sub-assembly


for RHD:

Air outlet damper position sensor value does not change even if air conditioning amplifier assembly operates No. 2 air conditioning radiator damper servo sub-assembly


·

No. 1 air conditioning radiator damper servo sub-assembly*2

·

No. 2 air conditioning radiator damper servo sub-assembly*3

·

Air conditioning harness assembly

·

Air conditioning amplifier assembly

·

Air conditioning radiator assembly


Memorized
(30 sec. or more)*1

*1: The air conditioning amplifier assembly stores this DTC if the malfunction has occurred for the period of time indicated in the brackets.

*2: for LHD

*3: for RHD


WIRING DIAGRAM

for LHD (for Dual Type)


E341943E06
0.333,3.417 2.781,3.615 2.448,0.198 10 false Front Passenger Side Mode 0.604,1.417 3.052,1.615 2.448,0.198 10 false Driver Side Air Mix 0.302,5.406 2.75,5.604 2.448,0.198 10 false Front Passenger Side Air Mix 0.615,6.073 2.552,6.583 1.938,0.51 10 false No. 1 Air Conditioning Radiator Damper Servo Sub-assembly 0.208,8.073 3.219,8.323 3.01,0.25 10 false No. 1 Blower Damper Servo Sub-assembly 0.781,8.531 3.792,8.781 3.01,0.25 10 false : LIN Communication Line 3.135,8.094 6.146,8.344 3.01,0.25 10 false Air Conditioning Harness Assembly 5.521,8.125 7.104,8.594 1.583,0.469 10 false Air Conditioning Amplifier Assembly 5.521,7.958 7.104,8.427 1.583,0.469 10 false z1 5.542,0.292 6.313,0.49 0.771,0.198 10 false B BUS 5.542,1.177 6.313,1.375 0.771,0.198 10 false BUS 5.552,2.063 6.323,2.26 0.771,0.198 10 false BUS G 5.344,0.292 6.115,0.49 0.771,0.198 10 false 4 5.333,1.146 6.115,1.344 0.781,0.198 10 false 3 5.344,2.073 6.125,2.271 0.781,0.198 10 false 2 6.646,0.281 7.156,0.49 0.51,0.208 10 false +B 6.76,1.281 7.146,1.479 0.385,0.198 10 false IC


for LHD (for Single Type)


E341944E03
0.781,7.49 2.719,7.74 1.938,0.25 10 false : LIN Communication Line 0.177,3.5 2.25,3.813 2.073,0.313 10 false Front Passenger Side Mode 0.729,1.51 3.479,1.708 2.75,0.198 10 false Air Mix 0.656,4.677 2.573,5.24 1.917,0.563 10 false No. 1 Air Conditioning Radiator Damper Servo Sub-assembly 0.26,6.781 3.167,7.031 2.906,0.25 10 false No. 1 Blower Damper Servo Sub-assembly 3.167,6.781 6.073,7.031 2.906,0.25 10 false Air Conditioning Harness Assembly 5.51,6.854 7.073,7.26 1.563,0.406 10 false Air Conditioning Amplifier Assembly 5.344,1.042 5.635,1.26 0.292,0.219 10 false 3 5.354,0.479 5.646,0.698 0.292,0.219 10 false 4 5.333,1.667 5.625,1.885 0.292,0.219 10 false 2 5.542,0.479 7,0.656 1.458,0.177 10 false B BUS 5.542,1.063 7,1.24 1.458,0.177 10 false BUS 5.542,1.667 7,1.844 1.458,0.177 10 false BUS G 6.646,0.458 6.938,0.677 0.292,0.219 10 false +B 6.75,1.177 7.042,1.396 0.292,0.219 10 false IC 5.51,6.698 7.073,7.104 1.563,0.406 10 false z1


for RHD


E332462E08
5.313,0.625 6.021,0.958 0.708,0.333 10 false 4 5.323,1.167 6.031,1.5 0.708,0.333 10 false 3 5.313,1.792 6.021,2.125 0.708,0.333 10 false 2 5.521,0.625 6.229,0.958 0.708,0.333 10 false B BUS 5.521,1.219 6.229,1.552 0.708,0.333 10 false BUS 5.521,1.792 6.229,2.125 0.708,0.333 10 false BUS G 5.542,2.51 6.25,2.844 0.708,0.333 10 false z1 5.521,2.677 7.073,3.125 1.552,0.448 10 false Air Conditioning Amplifier Assembly 3.052,2.698 5.26,3.208 2.208,0.51 10 false Air Conditioning Harness Assembly 0.219,2.656 2.635,3.25 2.417,0.594 10 false No. 2 Air Conditioning Radiator Damper Servo Sub-assembly 0.781,3.313 2.75,3.552 1.969,0.24 10 false : LIN Communication Line 6.615,0.604 6.979,0.906 0.365,0.302 10 false +B 6.771,1.292 7.135,1.594 0.365,0.302 10 false IC


CAUTION / NOTICE / HINT

HINT:
·

Confirm that no mechanical problem is present because this DTC can be output when either a damper link or damper is mechanically locked.

·

When installing the damper servo motor, make sure to install it correctly.

Click hereVehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING UNIT>REASSEMBLY



PROCEDURE

1.CONFIRM MODEL
a.

Choose the model to be inspected.


Result:
Result Proceed to
for LHD (for Dual Type) A
for LHD (for Single Type) B
for RHD C



A

2.CHECK FOR DTC

B

3.CHECK FOR DTC

C

6.CHECK FOR DTC
2.CHECK FOR DTC
a.

Check for DTCs.

Click hereVehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING SYSTEM>DTC CHECK / CLEAR

Body Electrical > Air Conditioner > Trouble Codes
50001 121

Result:
Result Proceed to
DTC B1497/97 is output A
DTC B1441/41, B1442/42, B1446/46 and B1448/48 are output B
DTC B1448/48 is output C



A

B

REPLACE NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY

C

4.INSPECT NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY (MOTOR, LINK, DAMPER)
3.CHECK FOR DTC
a.

Check for DTCs.

Click hereVehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING SYSTEM>DTC CHECK / CLEAR

Body Electrical > Air Conditioner > Trouble Codes
50001 121

Result:
Result Proceed to
DTC B1497/97 is output A
DTC B1441/41, B1442/42 and B1448/48 are output B
DTC B1448/48 is output C



A

B

REPLACE NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY

C

4.INSPECT NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY (MOTOR, LINK, DAMPER)
4.INSPECT NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY (MOTOR, LINK, DAMPER)
a.

Check for a wire harness caught between the links of the motors and dampers.

OK:

No wire harnesses are caught between the links of the motors and dampers.



Result:
Proceed to
OK
NG



OK

5.INSPECT AIR CONDITIONING RADIATOR ASSEMBLY (DAMPER)

NG

REMOVE PINCHED WIRE HARNESS

5.INSPECT AIR CONDITIONING RADIATOR ASSEMBLY (DAMPER)
a.

Remove the No. 1 air conditioning radiator damper servo sub-assembly.

Click hereVehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING UNIT>DISASSEMBLY


b.

Operate the dampers by hand.

OK:

The dampers are easily operated by hand.



Result:
Proceed to
OK
NG



OK

REPLACE NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY

NG

REPLACE AIR CONDITIONING RADIATOR ASSEMBLY

6.CHECK FOR DTC
a.

Check for DTCs.

Click hereVehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING SYSTEM>DTC CHECK / CLEAR

Body Electrical > Air Conditioner > Trouble Codes
50001 121

Result:
Result Proceed to
DTC B1497/97 is output A
DTC B1497/97 is not output B



A

B

7.INSPECT NO. 2 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY (INSTALLATION CONDITION)
7.INSPECT NO. 2 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY (INSTALLATION CONDITION)
a.

Check that the No. 2 air conditioning radiator damper servo sub-assembly is installed correctly.

Click hereVehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING UNIT>REASSEMBLY

OK:

Check that the No. 2 air conditioning radiator damper servo sub-assembly is installed correctly.



Result:
Proceed to
OK
NG



OK

8.INSPECT NO. 2 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY (MOTOR, LINK, DAMPER)

NG

INSTALL NO. 2 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY CORRECTLY

8.INSPECT NO. 2 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY (MOTOR, LINK, DAMPER)
a.

Check for a wire harness caught between the links of the motors and dampers.

OK:

No wire harnesses are caught between the links of the motors and dampers.



Result:
Proceed to
OK
NG



OK

9.INSPECT AIR CONDITIONING RADIATOR ASSEMBLY (DAMPER)

NG

REMOVE PINCHED WIRE HARNESS

9.INSPECT AIR CONDITIONING RADIATOR ASSEMBLY (DAMPER)
a.

Remove the No. 2 air conditioning radiator damper servo sub-assembly.

Click hereVehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING UNIT>DISASSEMBLY


b.

Operate the dampers by hand.

OK:

The dampers are easily operated by hand.



Result:
Proceed to
OK
NG



OK

10.PERFORM ACTIVE TEST USING GTS

NG

REPLACE AIR CONDITIONING RADIATOR ASSEMBLY

10.PERFORM ACTIVE TEST USING GTS
a.

Remove the No. 3 air conditioning radiator damper servo sub-assembly.

Click hereVehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING UNIT>DISASSEMBLY


b.

Connect the No. 3 air conditioning radiator damper servo sub-assembly connector to the No. 2 air conditioning radiator damper servo sub-assembly.


c.

Connect the GTS to the DLC3.


d.

Turn the power switch on (IG).


e.

Turn the GTS on.


f.

Enter the following menus: Body Electrical / Air Conditioner / Active Test.


g.

Perform the Active Test according to the display on the GTS.

Body Electrical > Air Conditioner > Active Test
Tester Display Measurement Item Control Range Diagnostic Note
A/O Servo Pulse(Rr D) No. 3 air conditioning radiator damper servo sub-assembly pulse* Min.: 128
Max.: 383
Operates between 250 to 297 pulses

*: Thus this Active Test is for the No. 3 air conditioning radiator damper servo sub-assembly, in this case it is used to check the operation of the No. 2 air conditioning radiator damper servo sub-assembly.


Body Electrical > Air Conditioner > Active Test
Tester Display
A/O Servo Pulse(Rr D)
50004 121 56
OK:

The No. 2 air conditioning radiator damper servo sub-assembly operates.



Result:
Proceed to
OK
NG



OK

REPLACE AIR CONDITIONING HARNESS ASSEMBLY

NG

REPLACE NO. 2 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY