REPLACEMENT
Removal / installation · Vehicles built Nov 2005 – Dec 2006
Versions by build date: Nov 2005 – Dec 2006 Jan 2007 – Jul 2007 from Aug 2007
| 1. REPLACE TRANSAXLE HOUSING OIL SEAL LH |
Drain the automatic transaxle fluid.
Remove the drain plug and gasket, and drain ATF.
Install a new gasket and drain plug.
- Torque:
- 47 N*m{ 479 kgf*cm , 35 ft.*lbf }
Remove the front drive shaft LH (Click here).
Remove the transaxle housing oil seal LH.

Using SST, tap out the oil seal.
- SST
- 09308-00010
Install a new transaxle housing oil seal LH.

Coat the lip of a new oil seal with MP grease.
Using SST and a hammer, tap in the oil seal.
- SST
- 09726-27012
(09726-02041)
09950-70010 (09951-07200, 09951-07200)
- Standard depth:
- 0 +-0.5 mm (0 +-0.020 in.)
Install the front drive shaft LH (Click here).
Add automatic transaxle fluid.
- Fluid type:
- Toyota Genuine ATF WS
Inspect the transaxle fluid level (Click here).
| 2. REPLACE TRANSAXLE HOUSING OIL SEAL RH |
Remove the engine assembly with transaxle.
for 1AZ-FE:
Remove the engine with transaxle (Click here).for 2AZ-FE:
Remove the engine with transaxle (Click here).
Drain the automatic transaxle fluid.
Remove the drain plug and gasket, and drain ATF.
Install a new gasket and the drain plug.
- Torque:
- 47 N*m{ 479 kgf*cm , 35 ft.*lbf }
Remove the 3 bolts and drive shaft bearing bracket.
Remove the 3 bolts and engine mount bracket RR.
Remove the transfer assembly (Click here).
Remove the transaxle housing oil seal RH.

Using a screwdriver with vinyl tape wound around its tip, remove the oil seal.
- NOTICE:
- Be careful not to damage the housing.
Install a new transaxle housing oil seal RH.

Coat the lip of a new oil seal with MP grease.
Using SST and a hammer, tap in the oil seal.
- SST
- 09309-37010
- Standard depth:
- 6.0 +-0.5 mm (0.236 +-0.020 in.)
Install the transfer assembly (Click here).
Install the engine mount bracket RR with the 3 bolts.
- Torque:
- 64 N*m{ 652 kgf*cm , 47 ft.*lbf }
Install the drive shaft bearing bracket with the 3 bolts.
- Torque:
- 64 N*m{ 653 kgf*cm , 47 ft.*lbf }
Install the engine assembly with transaxle.
for 1AZ-FE:
Install the engine with transaxle (Click here).for 2AZ-FE:
Install the engine with transaxle (Click here).
Add automatic transaxle fluid.
- Fluid type:
- Toyota Genuine ATF WS
Inspect the fluid level (Click here).
