Home › BODY ELECTRICAL › AUDIO / VISUAL › AUDIO AND VISUAL SYSTEM

AUDIO AND VISUAL SYSTEM > PROBLEM SYMPTOMS TABLE

for Preparation Click here


HINT:
Use the table below to help determine the cause of the problem symptom. The potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.


Audio function 
Symptom
Suspected Area
See page
Pressing power switch does not turn on system
Proceed to "Radio Receiver Power Source Circuit"
Click here
Turning on light control switch does not activate nighttime illumination of radio receiver
1. Proceed to "Illumination for Panel Switch does not Come on with Tail Switch ON"
Click here
2. Proceed to "Illumination Circuit"
Click here
No sound can be heard from speakers
1. Proceed to "No Sound can be Heard from Speakers"
Click here
2. Proceed to "Speaker Circuit"
Click here
3. Proceed to "Radio Receiver Power Source Circuit"
Click here
Poor sound quality in all modes (low volume)
1. Proceed to "Poor Sound Quality in All Modes (Low Volume)"
Click here
2. Proceed to "Speaker Circuit"
Click here
3. Proceed to "Radio Receiver Power Source Circuit"
Click here
Radio broadcast cannot be received (bad reception)
Proceed to "Radio Broadcast cannot be Received (Bad Reception)"
Click here
CD cannot be inserted or is ejected right after insertion
1. Proceed to "CD cannot be Inserted or is Ejected Right After Insertion"
Click here
2. Proceed to "Radio Receiver Power Source Circuit"
Click here
CD cannot be ejected
1. Proceed to "CD cannot be Ejected"
Click here
2. Proceed to "Radio Receiver Power Source Circuit"
Click here
Sound quality is bad only when CD is played (volume is too low)
Proceed to "Sound Quality is Bad Only when CD is Played (Volume is Too Low)"
Click here
CD sound skips
Proceed to "CD Sound Skips"
Click here
Noise occurs
Proceed to "Noise Occurs"
Click here
ALS (Automatic Sound Levelizer) does not function
Proceed to "Speed Signal Circuit"
Click here
External device sound cannot be heard or sound quality is bad (stereo jack is used)
1. Proceed to "Sound Signal Circuit between Radio Receiver and Stereo Jack Adapter"
Click here
2. Stereo Jack Adapter
Click here
3. Proceed to "Radio Receiver Power Source Circuit"
Click here

Steering pad switch function 
Symptom
Suspected Area
See page
Audio system cannot be operated with steering pad switch
Proceed to "Steering Pad Switch Circuit"
Click here

"Bluetooth" function 
Symptom
Suspected Area
See page
Cellular phone registration failure, phone directory transfer failure.
Proceed to "Cellular Phone Registration Failure, Phone Directory Transfer Failure"
Click here
Cellular phone cannot send / receiver
1. Proceed to "Cellular Phone cannot Send / Receive"
Click here
2. Proceed to "Steering Pad Switch Circuit"
Click here
3. Proceed to "Radio Receiver Power Source Circuit"
Click here
The other callers voice cannot be heard, is too quiet, or distorted
1. Proceed to "The Other Callers Voice cannot be Heard, is too Quiet, or Distorted"
Click here
2. Proceed to "Radio Receiver Power Source Circuit"
Click here
The other caller cannot hear you voice, or your voice is too quiet or distorted
1. Proceed to "The Other Caller cannot Hear Your Voice, or Your Voice is too Quiet or Distorted"
Click here
2. Proceed to "Microphone Circuit between Microphone and Radio Receiver"
Click here
3. Microphone
Click here
4. Proceed to "Radio Receiver Power Source Circuit"
Click here