Home › Brake › PARKING BRAKE › PARKING BRAKE CABLE
RM30B0U _54 Brake _011370 PARKING BRAKE _0059598 PARKING BRAKE CABLE A

PARKING BRAKE  PARKING BRAKE CABLE  INSTALLATION  


PROCEDURE

Hide 1.INSTALL PARKING BRAKE CABLE

C278495
0.438,0.406 0.594,0.604 0.156,0.198 10 B 0.448,0.76 0.604,0.958 0.156,0.198 10 B 2.125,2.021 2.281,2.219 0.156,0.198 10 C 2.292,2.333 2.448,2.531 0.156,0.198 10 C 5.729,0.708 5.885,0.906 0.156,0.198 10 F 3.646,0.865 3.802,1.063 0.156,0.198 10 D 6.427,1.833 6.583,2.031 0.156,0.198 10 E 0.313,3.615 0.469,3.813 0.156,0.198 10 A 1.458,5 1.594,5.188 0.135,0.188 10 D 6.542,3.813 6.698,4.01 0.156,0.198 10 E 3.208,5.135 3.365,5.333 0.156,0.198 10 F

a.

Connect the cables to the backing plates and parking brake shoe levers.

i.

Pass the cables through the backing plates, and then connect the cables to the levers.

Click hereBrake>PARKING BRAKE>PARKING BRAKE ASSEMBLY>REASSEMBLY


ii.

Install the cables to the backing plates with the bolts.

Torque:
8.0 N*m (82 kgf*cm, 71 in.*lbf)



b.

Install the clamps to the trailing arms with the 2 bolts (labeled F).

Torque:
6.0 N*m (61 kgf*cm, 53 in.*lbf)

NOTICE:

Securely install the clamps.



c.

Install the clamps to the rear suspension crossmember with the 2 bolts (labeled E).

Torque:
6.0 N*m (61 kgf*cm, 53 in.*lbf)

NOTICE:

Securely install the clamps.



d.

Install the clamps to the crossmember with the 2 bolts (labeled D).

Torque:
6.0 N*m (61 kgf*cm, 53 in.*lbf)

NOTICE:

Securely install the clamps.



e.

Install the clamps to the vehicle body with the 2 bolts (labeled C).

Torque:
6.0 N*m (61 kgf*cm, 53 in.*lbf)

NOTICE:

Securely install the clamps.



f.

Install the casing caps to the vehicle body with the 2 casing cap bolts (labeled B).

Torque:
6.0 N*m (61 kgf*cm, 53 in.*lbf)

NOTICE:

Securely install the casing caps.



g.

Install the cable clamp (labeled A) to the parking brake cable and vehicle body.

NOTICE:

Securely install the clamp.



Hide 2.INSTALL PARKING BRAKE EQUALIZER

a.
C278494

Connect the 3 cable ends to the equalizer to install the equalizer.


Hide 3.CHECK PARKING BRAKE LEVER TRAVEL

Hide 4.ADJUST PARKING BRAKE LEVER TRAVEL

Hide 5.INSTALL NO. 2 CONSOLE BOX MOUNTING BRACKET

Hide 6.INSTALL REAR CONSOLE BOX SUB-ASSEMBLY

Hide 7.INSTALL REAR WHEEL

Torque:
103 N*m (1050 kgf*cm, 76 ft.*lbf)