When the power back door warning system does not operate, one of the following may be malfunctioning: 1) wireless door lock control system, 2) wireless door lock buzzer circuit or 3) multiplex network door ECU.
The power back door warning function can be customized. Make sure the function is ON.
Click hereVehicle Exterior>DOOR / HATCH>POWER BACK DOOR SYSTEM>CUSTOMIZE PARAMETERS
Check power back door system operation.
| Proceed to |
|---|
| Hazard warning light does not come on |
| Power back door warning buzzer does not operate |
Hazard warning light does not come on
Power back door warning buzzer does not operate
Check wireless door lock operation.
w/ Smart Key System: Click hereVehicle Interior>DOOR LOCK>WIRELESS DOOR LOCK CONTROL SYSTEM(w/ Smart Key System)>HOW TO PROCEED WITH TROUBLESHOOTING
w/o Smart Key System: Click hereVehicle Interior>DOOR LOCK>WIRELESS DOOR LOCK CONTROL SYSTEM(w/o Smart Key System)>HOW TO PROCEED WITH TROUBLESHOOTING
| Proceed to |
|---|
| Hazard answer-back function operates normally |
| Hazard answer-back function does not operate |
Hazard answer-back function operates normally
Hazard answer-back function does not operate
w/ Smart Key System: Click hereVehicle Interior>DOOR LOCK>WIRELESS DOOR LOCK CONTROL SYSTEM(w/o Smart Key System)>HOW TO PROCEED WITH TROUBLESHOOTING
w/o Smart Key System: Click hereVehicle Interior>DOOR LOCK>WIRELESS DOOR LOCK CONTROL SYSTEM(w/ Smart Key System)>HOW TO PROCEED WITH TROUBLESHOOTING
Temporarily replace the multiplex network door ECU with a new or normally functioning one.
Click hereVehicle Exterior>DOOR / HATCH>BACK DOOR CLOSER ECU>REMOVAL
| Proceed to |
|---|
| NEXT |
NEXT
Check that the power back door hazard warning lights operate normally.
| Proceed to |
|---|
| The power back door hazard warning lights operate normally |
| The power back door hazard warning lights operate abnormally |
The power back door hazard warning lights operate normally
The power back door hazard warning lights operate abnormally
Check the Data List for proper functioning of the wireless door lock buzzer.
Click hereVehicle Exterior>DOOR / HATCH>POWER BACK DOOR SYSTEM>DATA LIST / ACTIVE TEST
| Tester Display | Measurement Item | Control Range | Diagnostic Note |
|---|---|---|---|
| PBD Buzzer | Wireless door lock buzzer sound | ON or OFF | - |
| Tester Display |
|---|
| PBD Buzzer |
| Proceed to |
|---|
| Wireless door lock buzzer sounds |
| Wireless door lock buzzer does not sound |
Wireless door lock buzzer sounds
Wireless door lock buzzer does not sound
Disconnect the U14 wireless door lock buzzer connector.
Disconnect the U18 multiplex network door ECU connector.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| U14-1 (BZR+) - U18-5 (BZR+) | Always | Below 1 Ω |
| U14-2 (BZR-) - Body ground | Always | Below 1 Ω |
| U14-1 (BZR+) or U18-5 (BZR+) - Body ground | Always | 10 kΩ or higher |
| Proceed to |
|---|
| OK |
| NG |
OK
NG
Temporarily replace the wireless door lock buzzer with a new or normally functioning one.
Click hereVehicle Exterior>DOOR / HATCH>POWER BACK DOOR WARNING BUZZER>REMOVAL
| Proceed to |
|---|
| NEXT |
NEXT
Check that the wireless door lock buzzer operates normally.
| Proceed to |
|---|
| Wireless door lock buzzer sounds |
| Wireless door lock buzzer does not sound |
Wireless door lock buzzer sounds
Wireless door lock buzzer does not sound