Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM › from 2013.11
RM30B0U _56 Audio / Visual / Telematics _009009 NAVIGATION / MULTI INFO DISPLAY _0104226 NAVIGATION SYSTEM C

NAVIGATION / MULTI INFO DISPLAY  NAVIGATION SYSTEM  B15F6  Main Body ECU Vehicle Information Reading/Writing Process Malfunction  


DESCRIPTION

This DTC is stored when items controlled by the main body ECU (multiplex network body ECU) cannot be customized via the navigation system vehicle customization screen.

HINT:

The main body ECU (multiplex network body ECU) controls the items for the following systems that are customizable via the navigation receiver assembly screen:

·

Power door lock control system

·

Wireless door lock control system (w/ Smart Key System)

·

Wireless door lock control system (w/o Smart Key System)

·

Lighting system (EXT)



DTC No. Detection Item DTC Detection Condition Trouble Area
B15F6 Main Body ECU Vehicle Information Reading/Writing Process Malfunction Main body ECU (multiplex network body ECU) vehicle setting processing error.
·

CAN communication system

·

Power door lock control system

·

Wireless door lock control system (w/ Smart Key System)

·

Wireless door lock control system (w/o Smart Key System)

·

Lighting system (EXT)

·

Main body ECU (multiplex network body ECU)

·

Navigation receiver assembly



CAUTION / NOTICE / HINT

NOTICE:

Check that the wire harness is properly installed and does not have any sharp bends, pinching or loose connections.

Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING


PROCEDURE

1.CHECK CAN COMMUNICATION SYSTEM
a.

Use the Techstream to check if the CAN communication system is functioning normally.

Click herePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING

OK:

CAN communication DTCs are not output.



Result:
Proceed to
OK
NG



OK

2.CHECK POWER DOOR LOCK CONTROL SYSTEM

NG

2.CHECK POWER DOOR LOCK CONTROL SYSTEM
a.

Check if the power door lock control system is malfunctioning.

Click hereVehicle Interior>DOOR LOCK>POWER DOOR LOCK CONTROL SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING

HINT:

Customization may not be possible depending on the malfunction in the power door lock control system.


OK:

No malfunctions are present in the power door lock control system.



Result:
Proceed to
OK (w/ Smart Key System)
OK (w/o Smart Key System)
NG



OK (w/ Smart Key System)

3.CHECK WIRELESS DOOR LOCK CONTROL SYSTEM (w/ Smart Key System)

OK (w/o Smart Key System)

4.CHECK WIRELESS DOOR LOCK CONTROL SYSTEM (w/o Smart Key System)

NG

3.CHECK WIRELESS DOOR LOCK CONTROL SYSTEM (w/ Smart Key System)
a.

Check if the wireless door lock control system (w/ Smart Key System) is malfunctioning.

Click hereVehicle Interior>DOOR LOCK>WIRELESS DOOR LOCK CONTROL SYSTEM(w/ Smart Key System)>HOW TO PROCEED WITH TROUBLESHOOTING

HINT:

Customization may not be possible depending on the malfunction in the wireless door lock control system (w/ Smart Key System).


OK:

No malfunctions are present in the wireless door lock control system (w/ Smart Key System).



Result:
Proceed to
OK
NG



OK

5.CHECK LIGHTING SYSTEM (EXT)

NG

4.CHECK WIRELESS DOOR LOCK CONTROL SYSTEM (w/o Smart Key System)
a.

Check if the wireless door lock control system (w/o Smart Key System) is malfunctioning.

Click hereVehicle Interior>DOOR LOCK>WIRELESS DOOR LOCK CONTROL SYSTEM(w/o Smart Key System)>HOW TO PROCEED WITH TROUBLESHOOTING

HINT:

Customization may not be possible depending on the malfunction in the wireless door lock control system (w/o Smart Key System).


OK:

No malfunctions are present in the wireless door lock control system (w/o Smart Key System).



Result:
Proceed to
OK
NG



OK

5.CHECK LIGHTING SYSTEM (EXT)

NG

5.CHECK LIGHTING SYSTEM (EXT)
a.

Check if the lighting system (EXT) is malfunctioning.

Click hereVehicle Exterior>LIGHTING (EXT)>LIGHTING SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING

HINT:

Customization may not be possible depending on the malfunction in the lighting system (EXT).


OK:

No malfunctions are present in the lighting system (EXT).



Result:
Proceed to
OK
NG



OK

6.CHECK CUSTOMIZE ITEMS

NG

6.CHECK CUSTOMIZE ITEMS
a.

Display the "Vehicle customization" screen.


b.

Make a note of the customizable items for each main body ECU (multiplex network body ECU) related system.

HINT:

These items shown as customizable via the navigation receiver assembly vehicle customization screen can also be changed using the Techstream. In a following step, the Techstream will be used.


i.

To match-up the items in the navigation receiver assembly with the items on the Techstream, check the customize parameters list for the power door lock control system related items that can be customized via the navigation receiver assembly screen.

Click hereVehicle Interior>DOOR LOCK>POWER DOOR LOCK CONTROL SYSTEM>CUSTOMIZE PARAMETERS


ii.

To match-up the items in the navigation receiver assembly with the items on the Techstream, check the customize parameters list for the wireless door lock control system (w/ Smart Key System) related items that can be customized via the navigation receiver assembly screen.

Click hereVehicle Interior>DOOR LOCK>WIRELESS DOOR LOCK CONTROL SYSTEM(w/ Smart Key System)>CUSTOMIZE PARAMETERS


iii.

To match-up the items in the navigation receiver assembly with the items on the Techstream, check the customize parameters list for the wireless door lock control system (w/o Smart Key System) related items that can be customized via the navigation receiver assembly screen.

Click hereVehicle Interior>DOOR LOCK>WIRELESS DOOR LOCK CONTROL SYSTEM(w/o Smart Key System)>CUSTOMIZE PARAMETERS


iv.

To match-up the items in the navigation receiver assembly with the items on the Techstream, check the customize parameters list for the lighting system (EXT) related items that can be customized via the navigation receiver assembly screen.

Click hereVehicle Exterior>LIGHTING (EXT)>LIGHTING SYSTEM>CUSTOMIZE PARAMETERS



c.

Using the Techstream, confirm that it is possible to change the settings of the customize parameters that are available for customization via the navigation receiver assembly screen.

OK:

The items available for customization via the navigation receiver assembly screen can be customized successfully using the Techstream.



Result:
Proceed to
OK
NG



OK

NG

REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)