Home › Engine / Hybrid System › 2AD-FTV LUBRICATION › ENGINE OIL COOLER
RM3090E _51 Engine / Hybrid System _008385 2AD-FTV LUBRICATION _0046784 ENGINE OIL COOLER A

2AD-FTV LUBRICATION  ENGINE OIL COOLER  REMOVAL  


CAUTION / NOTICE / HINT

NOTICE:
·

When replacing the injectors (including shuffling the injectors between the cylinders), common rail, intake manifold or cylinder head, it is necessary to replace the injection pipes with new ones.

·

When replacing the fuel supply pump, common rail, intake manifold or cylinder head, it is necessary to replace the fuel inlet pipe with a new one.



PROCEDURE

Hide 1. PRECAUTION

NOTICE:

After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION


Hide 2.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION


Hide 26100 3.REMOVE DIESEL THROTTLE BODY ASSEMBLY

Hide 25625 6.REMOVE EGR VALVE BRACKET

Hide 16295 7.REMOVE NO. 7 WATER BY-PASS HOSE

Hide 16296 8.DISCONNECT NO. 8 WATER BY-PASS HOSE

Hide 25602 9.REMOVE NO. 2 EGR PIPE SUB-ASSEMBLY

Hide 25800 10.REMOVE ELECTRIC EGR CONTROL VALVE ASSEMBLY

Hide 23804C 11.REMOVE FUEL INLET PIPE SUB-ASSEMBLY

Hide 23701 12.REMOVE INJECTION PIPE SUB-ASSEMBLY

Hide 23810A 13.REMOVE COMMON RAIL ASSEMBLY

Hide 17853B 14.REMOVE INTAKE MANIFOLD INSULATOR

Hide 11452 15.REMOVE ENGINE OIL LEVEL DIPSTICK GUIDE

Hide 89421C 16.REMOVE DIESEL TURBO PRESSURE SENSOR

Hide 12631A 19.REMOVE ENGINE COVER BRACKET

Hide 17112 20.REMOVE NO. 2 INTAKE MANIFOLD

Hide 25770A 21.DISCONNECT NO. 2 VACUUM TRANSMITTING HOSE ASSEMBLY

Hide 16261 23.REMOVE WATER BY-PASS HOSE

a.
A197563

Slide the 2 clamps and remove the water by-pass hose from the oil cooler assembly and water outlet.


Hide 15710 24.REMOVE OIL COOLER ASSEMBLY

a.
A197565

Remove the 5 bolts and oil cooler assembly.


b.

Remove the 3 O-rings from the No. 1 oil cooler bracket.