1.REMOVE ENGINE WIRE
22210
2.REMOVE THROTTLE BODY ASSEMBLY
17361M
3.REMOVE AIR TUBE
87246A
4.REMOVE HEATER WATER OUTLET HOSE
Slide the clamp and disconnect the heater water outlet hose from the No. 1 water by-pass pipe.
87245A
5.REMOVE HEATER WATER INLET HOSE
Slide the clamp and disconnect the heater water inlet hose from the cylinder head sub-assembly.
17111
6.REMOVE INTAKE MANIFOLD
7.REMOVE WIRE HARNESS CLAMP BRACKET
23901
8.REMOVE FUEL TUBE SUB-ASSEMBLY
23807
9.REMOVE FUEL DELIVERY PIPE SUB-ASSEMBLY
23250
10.REMOVE FUEL INJECTOR ASSEMBLY
11452
11.REMOVE ENGINE OIL LEVEL DIPSTICK GUIDE
Remove the engine oil level dipstick.
Remove the bolt and engine oil level dipstick guide.
Remove the O-ring from the engine oil level dipstick guide.
17167
12.REMOVE NO. 1 EXHAUST MANIFOLD HEAT INSULATOR
17118
13.REMOVE MANIFOLD STAY
17141
14.REMOVE EXHAUST MANIFOLD
16279
15.REMOVE NO. 3 WATER BY-PASS PIPE (for CVT)
Remove the 2 nuts, No. 3 water by-pass pipe and gasket.
11492D
16.REMOVE NO. 1 SEAL PLATE (for Manual Transaxle)
Remove the 2 nuts, No. 1 seal plate and gasket.
12261
17.REMOVE PCV HOSE
Remove the PCV hose from the PCV valve.
16267
18.DISCONNECT NO. 3 WATER BY-PASS HOSE
Slide the clamp and disconnect the No. 3 water by-pass hose from the water inlet housing.
16261
19.REMOVE WATER BY-PASS HOSE
Slide the clamp and remove the water by-pass hose.
16262
20.REMOVE WATER INLET HOSE
Slide the 2 clamps and remove the water inlet hose.
16268
21.REMOVE NO. 1 WATER BY-PASS PIPE
Remove the 2 bolts and No. 1 water by-pass pipe.
16321
22.REMOVE WATER INLET
16331A
23.REMOVE THERMOSTAT
19500
24.REMOVE IGNITION COIL ASSEMBLY
44773F
25.DISCONNECT UNION TO CHECK VALVE HOSE
29300
26.REMOVE VACUUM PUMP ASSEMBLY
12551A
27.REMOVE NO. 1 VACUUM PUMP BRACKET
Remove the 2 bolts, No. 1 vacuum pump bracket and gasket.