1.REMOVE FRONT DRIVE SHAFT ASSEMBLY
17118
2.REMOVE MANIFOLD STAY
43457
3.REMOVE DRIVE SHAFT BEARING BRACKET
31105H
4.REMOVE TRANSAXLE CASE OIL SEAL
Using SST, remove the front transaxle case oil seal.
33111Q
5.REMOVE TRANSMISSION CASE OIL SEAL
Using SST, remove the transmission case oil seal.
33111Q
6.INSTALL TRANSMISSION CASE OIL SEAL
Coat the lip of a new transmission oil seal with MP grease.
| *a | -0.5 to 0.5 mm (-0.0197 to 0.0196 in.) |
Using SST and a hammer, tap in the transmission case oil seal to the manual transmission case.
-0.5 to 0.5 mm (-0.0197 to 0.0196 in.)
Do not damage the transmission oil seal lip.
31105H
7.INSTALL TRANSAXLE CASE OIL SEAL
Coat the lip of a new front transaxle case oil seal with MP grease.
| *a | -0.5 to 0.5 mm (-0.0197 to 0.0196 in.) |
Using SST and a hammer, tap in the front transaxle case oil seal to the front transaxle case.
-0.5 to 0.5 mm (-0.0197 to 0.0196 in.)
Do not damage the front transaxle case oil seal lip.
43457
8.INSTALL DRIVE SHAFT BEARING BRACKET
17118
9.INSTALL MANIFOLD STAY
10.INSTALL FRONT DRIVE SHAFT ASSEMBLY