Home › Drivetrain › K111F MULTIDRIVE / CVT › FRONT DIFFERENTIAL OIL SEAL(for LH Side) › 2012.12–2015.10
RM3090E _52 Drivetrain _009408 K111F MULTIDRIVE / CVT _0051016 FRONT DIFFERENTIAL OIL SEAL(for LH Side) A

K111F MULTIDRIVE / CVT  FRONT DIFFERENTIAL OIL SEAL(for LH Side)  REPLACEMENT  


PROCEDURE

Hide 51444C 2.REMOVE REAR ENGINE UNDER COVER LH

Hide 3.DRAIN CONTINUOUSLY VARIABLE TRANSAXLE FLUID

a.
C242832

Using a 6 mm socket hexagon wrench, remove the overflow plug and gasket from the continuously variable transaxle assembly.


b.
C279062C05
2.583,0.823 2.833,0.396 2.833,0.396 2.948,0.396 false 2.99,0.323 3.302,0.521 0.313,0.198 10 *1
*1 No. 1 Transmission Oil Filler Tube


Using a 6 mm socket hexagon wrench, remove the No. 1 transmission oil filler tube from the continuously variable transaxle assembly and drain the continuously variable transaxle fluid.


c.

Using a 6 mm socket hexagon wrench, install the No. 1 transmission oil filler tube to the continuously variable transaxle assembly.

Torque:
1.7 N*m (17 kgf*cm, 15 in.*lbf)


d.

Temporarily install the gasket and overflow plug.

HINT:

Reuse the old gasket. The plug will be removed again to adjust the fluid level.



Hide 30400C 5.REMOVE CVT TYPE T OIL SEAL LH

a.
C103977E03
0.895,2.315 1.208,2.462 0.314,0.147 10 SST 1.051,1.163 1.051,2.278 false 1.928,2.815 2.242,2.962 0.314,0.147 10 SST 2.117,2.573 2.117,2.778 false

Using SST, remove the CVT type T oil seal LH from the transaxle case.

SST
09308-00010  

NOTICE:

Do not damage the transaxle case.



Hide 30400C 6.INSTALL CVT TYPE T OIL SEAL LH

C279203E04
0.583,2.323 1.542,1.094 false 0.594,2.313 2.167,1.135 false 0.604,2.323 2.083,2.354 false 0.292,2.229 0.75,2.49 0.458,0.26 10 SST

a.

Using SST and a hammer, tap in a new CVT type T oil seal LH to the transaxle case.

SST
09316-10010  09950-70010  (09951-07200)

Standard depth:

-0.5 to 0.5 mm (-0.0197 to 0.0197 in.)


NOTICE:

Do not damage the lip of the CVT type T oil seal LH.



b.

Coat the lip of the CVT type T oil seal LH with MP grease.


Hide 8.ADD CONTINUOUSLY VARIABLE TRANSAXLE FLUID