Home › Engine / Hybrid System › CRUISE CONTROL › CRUISE CONTROL SYSTEM › from 2015.10
RM3090E _51 Engine / Hybrid System _008749 CRUISE CONTROL _0050250 CRUISE CONTROL SYSTEM C

CRUISE CONTROL  CRUISE CONTROL SYSTEM  P0575  Cruise Control Input Circuit  


DESCRIPTION

This DTC indicates the presence of internal abnormalities in the ECM.

DTC No. Detection Item DTC Detection Condition Trouble Area
P0575 Cruise Control Input Circuit Either condition is met:
·

The cruise control input signal is abnormal

·

The stop light switch input signal is abnormal


ECM

CAUTION / NOTICE / HINT

HINT:

The ECM receives signals from each sensor to control all functions of the cruise control system. When a trouble code is detected, the fail-safe function remains on until the ignition switch is turned off.


PROCEDURE

1.CHECK FOR DTC
a.

Clear the DTCs.

Click hereEngine / Hybrid System>CRUISE CONTROL>CRUISE CONTROL SYSTEM>DTC CHECK / CLEAR

i.

for 2AD-FTV, 2AD-FHV:

Powertrain > Cruise Control > Clear DTCs
50002 76

ii.

for 2AR-FE, 3ZR-FE, 3ZR-FAE:

Powertrain > Cruise Control > Clear DTCs
50002 237

iii.

for 2WW:

Powertrain > Cruise Control > Clear DTCs
50002 391


b.

Recheck for DTCs.

Click hereEngine / Hybrid System>CRUISE CONTROL>CRUISE CONTROL SYSTEM>DTC CHECK / CLEAR

i.

for 2AD-FTV, 2AD-FHV:

Powertrain > Cruise Control > Trouble Codes
50001 76

ii.

for 2AR-FE, 3ZR-FE, 3ZR-FAE:

Powertrain > Cruise Control > Trouble Codes
50001 237

iii.

for 2WW:

Powertrain > Cruise Control > Trouble Codes
50001 391


Result:
Proceed to
DTC P0575 is not output
DTC P0575 is output



DTC P0575 is not output

DTC P0575 is output