Home › Vehicle Interior › SEAT › FRONT POWER SEAT CONTROL SYSTEM(w/ Memory) › from 2016.08
RM3090E _58 Vehicle Interior _008433 SEAT _0062871 FRONT POWER SEAT CONTROL SYSTEM(w/ Memory) J

SEAT  FRONT POWER SEAT CONTROL SYSTEM(w/ Memory)  Wireless-linked Return Function does not Operate  


DESCRIPTION

When a door is unlocked using the wireless unlock function*1 or entry unlock function*2, the certification ECU (smart key ECU assembly) sends a door unlock signal and key ID signal to the main body ECU (multiplex network body ECU). When the main body ECU (multiplex network body ECU) receives the door unlock signal, it stores the key ID. When the driver door is opened, the memory call and memory command information of the stored key ID is sent to each driving position related control ECU. Each control ECU receives the memory commands and performs the memory call operation according to predetermined control timing values.

*1: w/o Entry and Stert System

*2: w/ Entry and Start System


CAUTION / NOTICE / HINT

NOTICE:
·

The front power seat control system (w/ Memory) uses the CAN communication system. First, confirm that there is no malfunction in the communication system by checking communication function of the CAN communication system. Refer to the How to Proceed with Troubleshooting procedure.

Click hereVehicle Interior>SEAT>FRONT POWER SEAT CONTROL SYSTEM(w/ Memory)>HOW TO PROCEED WITH TROUBLESHOOTING

·

When replacing the main body ECU (multiplex network body ECU), make sure to replace it with a new one.



PROCEDURE

1.CHECK FRONT POWER SEAT CONTROL SYSTEM
a.

b.

Check whether seat positions can be stored in memory.

Click hereVehicle Interior>SEAT>FRONT POWER SEAT CONTROL SYSTEM(w/ Memory)>OPERATION CHECK


c.

Check whether seat positions can be restored.

Click hereVehicle Interior>SEAT>FRONT POWER SEAT CONTROL SYSTEM(w/ Memory)>OPERATION CHECK


d.

Check the operation of memory call registration.

Click hereVehicle Interior>SEAT>FRONT POWER SEAT CONTROL SYSTEM(w/ Memory)>OPERATION CHECK


Result:
Result Proceed to
OK A
NG (power seat operation) B
NG (seat position memory) C
NG (seat position restoring) D
NG (memory call registration) E



A

2.CHECK MEMORY CALL FUNCTION (WIRELESS UNLOCK OR ENTRY UNLOCK)

B

C

GO TO OTHER DIAGNOSIS PROCEDURE (Power Seat Position is not Memorized)

D

GO TO OTHER DIAGNOSIS PROCEDURE (Power Seat does not Return to Memorized Position)

E

GO TO OTHER DIAGNOSIS PROCEDURE (Wireless Transmitter Memory Function does not Operate)

2.CHECK MEMORY CALL FUNCTION (WIRELESS UNLOCK OR ENTRY UNLOCK)
a.

Turn the ignition switch off.


b.

Close and lock all doors.


c.

Unlock the driver door by pressing the unlock switch of the memory call registered key (wireless unlock function).


d.

Unlock the driver door by touching the driver door outside handle while holding the memory call registered key (entry unlock function).


e.

Open the driver door and check that the driver seat moves to the memorized position.


Result:
Result Proceed to
Memory call function linked with the wireless unlock function does not operate. (w/o Entry and Start System) A
Memory call function linked with the entry unlock function does not operate. (w/ Entry and Start System) B



A

3.CHECK WIRELESS UNLOCK FUNCTION

B

4.CHECK ENTRY AND START SYSTEM (ENTRY UNLOCK FUNCTION)
3.CHECK WIRELESS UNLOCK FUNCTION
a.

Check the wireless unlock function.

Click hereVehicle Interior>DOOR LOCK>WIRELESS DOOR LOCK CONTROL SYSTEM(w/o Entry and Start System)>OPERATION CHECK

OK:

Wireless unlock function is normal.



Result:
Proceed to
OK
NG



OK

5.REPLACE POSITION CONTROL ECU AND SWITCH ASSEMBLY

NG

4.CHECK ENTRY AND START SYSTEM (ENTRY UNLOCK FUNCTION)
a.

Check the entry unlock function of the smart key system.

Click hereVehicle Interior>THEFT DETERRENT / KEYLESS ENTRY>ENTRY AND START SYSTEM(for Start Function)>OPERATION CHECK

OK:

Entry unlock function is normal.



Result:
Proceed to
OK
NG



OK

5.REPLACE POSITION CONTROL ECU AND SWITCH ASSEMBLY

NG

5.REPLACE POSITION CONTROL ECU AND SWITCH ASSEMBLY
a.

Replace the position control ECU and switch assembly.

Click hereVehicle Interior>SEAT>POWER SEAT CONTROL ECU>REMOVAL


Result:
Proceed to
NEXT



NEXT

6.CHECK MEMORY CALL FUNCTION
6.CHECK MEMORY CALL FUNCTION


c.

Turn the ignition switch off.


d.

Close and lock all doors.


e.

Unlock the driver door by pressing the unlock switch of the memory call registered key or touching the driver door outside handle while holding the memory call registered key.


f.

Open the driver door and check that the driver seat moves to the memorized position.

Click hereVehicle Interior>SEAT>FRONT POWER SEAT CONTROL SYSTEM(w/ Memory)>OPERATION CHECK

OK:

Driver seat moves to the memorized position.



Result:
Proceed to
OK
NG



OK

END (POSITION CONTROL ECU AND SWITCH ASSEMBLY WAS DEFECTIVE)

NG