51441
1.REMOVE NO. 1 ENGINE UNDER COVER
51444C
2.REMOVE REAR ENGINE UNDER COVER LH
74414B
3.REMOVE BATTERY BRACKET REINFORCEMENT
for 2AR-FE:
Click hereEngine / Hybrid System>2AR-FE STARTING>STARTER(for 1.6 kW Type)>REMOVAL
for 3ZR-FAE:
Click hereEngine / Hybrid System>3ZR-FAE STARTING>STARTER(w/ Stop And Start System)>REMOVAL
for 3ZR-FE:
for 1.0 kW Type: Click hereEngine / Hybrid System>3ZR-FE STARTING>STARTER(for 1.0 kW Type)>REMOVAL
for 1.3 kW Type: Click hereEngine / Hybrid System>3ZR-FE STARTING>STARTER(for 1.3 kW Type)>REMOVAL
31490
4.REMOVE CLUTCH ACCUMULATOR ASSEMBLY
Using a 10 mm union nut wrench, disconnect the accumulator to flexible hose tube from the clutch hose.
Use a container to collect the fluid.
Remove the clip and clutch hose from the clutch accumulator assembly.
Using a 10 mm union nut wrench, loosen the bleeder to accumulator tube labeled A and accumulator to flexible hose tube labeled B.
Remove the bolt, clamp, bleeder to accumulator tube and accumulator to flexible hose tube.
Remove the 3 bolts and clutch accumulator assembly from the manual transaxle assembly.