CHECK INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY AND MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)
| *A | except LHD, Manual Transaxle | *B | for LHD, Manual Transaxle |
| *1 | Main Body ECU (Multiplex Network Body ECU) | - | - |
Remove the main body ECU (multiplex network body ECU) from the instrument panel junction block assembly.
for LHD: Click herePower Source / Network>POWER DISTRIBUTION>MAIN BODY ECU (for LHD)>REMOVAL
for RHD: Click herePower Source / Network>POWER DISTRIBUTION>MAIN BODY ECU (for RHD)>REMOVAL
Reconnect the instrument panel junction block assembly connectors.
Measure the voltage and resistance according to the value(s) in the table below.
| Tester Connection | Wiring Color | Input/Output | Terminal Description | Condition | Specified Condition | Related Data List Item |
|---|---|---|---|---|---|---|
| A-11 (GND1) - Body ground | - | - | Ground | Always | Below 1 Ω | - |
| A-30 (ACC) - Body ground | - | Input | ACC power supply | Ignition switch ACC | 11 to 14 V | ACC SW |
| Ignition switch off | Below 1 V | |||||
| A-31 (BECU) - Body ground | - | Input | Auxiliary battery power supply | Ignition switch off | 11 to 14 V | - |
| A-32 (IG) - Body ground | - | Input | IG power supply | Ignition switch ON | 11 to 14 V*1
10.5 to 16 V*2 |
IG SW |
| Ignition switch off | Below 1 V |
*1: except Manual Transaxle, with Stop and Start System
*2: for Manual Transaxle, with Stop and Start System
Install the main body ECU (multiplex network body ECU) to the instrument panel junction block assembly.
for LHD: Click herePower Source / Network>POWER DISTRIBUTION>MAIN BODY ECU (for LHD)>INSTALLATION
for RHD: Click herePower Source / Network>POWER DISTRIBUTION>MAIN BODY ECU (for RHD)>INSTALLATION
Measure the voltage and check for pulses according to the value(s) in the table below.
| Tester Connection | Wiring Color | Input/Output | Terminal Description | Condition | Specified Condition | Related Data List Item |
|---|---|---|---|---|---|---|
| G44-1 (FLCY) - Body ground | R - Body ground | Input | Front door courtesy light switch assembly LH input | Front door LH open → closed | Below 1 V → 4.7 to 5.3 V | FL Door Courtesy SW |
| G44-6 (FRCY) - Body ground | BE - Body ground | Input | Front door courtesy light switch assembly RH input | Front door RH open → closed | Below 1 V → 4.7 to 5.3 V | FR Door Courtesy SW |
| 4H-24 (LCTY) - Body ground*1*8 | G - Body ground | Input | Rear door courtesy light switch assembly LH input | Rear door LH open → closed | Below 1 V → 4.7 to 5.3 V | RL Door Courtesy SW |
| 4N-24 (LCTY) - Body ground*1*9 | LA-B - Body ground | Input | Rear door courtesy light switch assembly LH input | Rear door LH open → closed | Below 1 V → 4.7 to 5.3 V | RL Door Courtesy SW |
| 4H-24 (LCTY) - Body ground*2 | G - Body ground | Input | Rear door courtesy light switch assembly LH input | Rear door LH open → closed | Below 1 V → 4.7 to 5.3 V | RL Door Courtesy SW |
| 4A-31 (RCTY) - Body ground | LA-V - Body ground | Input | Rear door courtesy light switch assembly RH input | Rear door RH open → closed | Below 1 V → 4.7 to 5.3 V | RR Door Courtesy SW |
| G45-18 (L2) - Body ground | LG - Body ground | Input | Driver door key-linked lock input | Driver door key cylinder turned to neutral position → on (lock) | Pulse generation → Below 1 V | Door Key SW-Lock |
| G45-17 (UL3) - Body ground*1 | BE - Body ground | Input | Driver door key-linked unlock input | Driver door key cylinder turned to neutral position → on (unlock) | Pulse generation → Below 1 V | D Door Key SW-UL |
| G45-17 (UL3) - Body ground*2 | R - Body ground | Input | Driver door key-linked unlock input | Driver door key cylinder turned to neutral position → on (unlock) | Pulse generation → Below 1 V | D Door Key SW-UL |
| 4N-6 (ACT+) - Body ground*1*9 | LA-B - Body ground | Output | Door lock motor lock drive output | Door control switch or door key cylinder off → on (lock) | Below 1 V → 11 to 14 V → Below 1 V | - |
| 4H-6 (ACT+) - Body ground*1*8 | BR - Body ground | Output | Door lock motor lock drive output | Door control switch or door key cylinder off → on (lock) | Below 1 V → 11 to 14 V → Below 1 V | - |
| 4H-6 (ACT+) - Body ground*2 | BR - Body ground | Output | Door lock motor lock drive output | Door control switch or door key cylinder off → on (lock) | Below 1 V → 11 to 14 V → Below 1 V | - |
| 4N-18 (ACT+) - Body ground*1*9 | LA-B - Body ground | Output | Door lock motor lock drive output | Door control switch or door key cylinder off → on (lock) | Below 1 V → 11 to 14 V → Below 1 V | - |
| 4H-18 (ACT+) - Body ground*1*8 | LA-B - Body ground | Output | Door lock motor lock drive output | Door control switch or door key cylinder off → on (lock) | Below 1 V → 11 to 14 V → Below 1 V | - |
| 4H-18 (ACT+) - Body ground*2 | LA-B - Body ground | Output | Door lock motor lock drive output | Door control switch or door key cylinder off → on (lock) | Below 1 V → 11 to 14 V → Below 1 V | - |
| 4N-8 (ACT-) - Body ground*1*9 | G - Body ground | Output | Door lock motor lock drive output | Door control switch or door key cylinder off → on (unlock) | Below 1 V → 11 to 14 V → Below 1 V | - |
| 4H-8 (ACT-) - Body ground*1*8 | LA-G - Body ground | Output | Door lock motor lock drive output | Door control switch or door key cylinder off → on (unlock) | Below 1 V → 11 to 14 V → Below 1 V | - |
| 4H-8 (ACT-) - Body ground*2 | LA-R - Body ground | Output | Door lock motor lock drive output | Door control switch or door key cylinder off → on (unlock) | Below 1 V → 11 to 14 V → Below 1 V | - |
| 4N-9 (ACT-) - Body ground*1*9 | LA-R - Body ground | Output | Door lock motor lock drive output | Door control switch or door key cylinder off → on (unlock) | Below 1 V → 11 to 14 V → Below 1 V | - |
| 4H-9 (ACT-) - Body ground*1*8 | R - Body ground | Output | Door lock motor lock drive output | Door control switch or door key cylinder off → on (unlock) | Below 1 V → 11 to 14 V → Below 1 V | - |
| 4H-9 (ACT-) - Body ground*2 | R - Body ground | Output | Door lock motor lock drive output | Door control switch or door key cylinder off → on (unlock) | Below 1 V → 11 to 14 V → Below 1 V | - |
| 4D-4 (ACTD) - Body ground*1 | LA-LG - Body ground | Output | Driver door lock motor unlock drive output | Door control switch or driver door key cylinder off → on (unlock) | Below 1 V → 11 to 14 V → Below 1 V | - |
| 4D-4 (ACTD) - Body ground*2 | R - Body ground | Output | Driver door lock motor unlock drive output | Door control switch or driver door key cylinder off → on (unlock) | Below 1 V → 11 to 14 V → Below 1 V | - |
| 4D-12 (LSFR) - Body ground | W - Body ground | Input | Front door RH unlock detection switch input | Front door RH locked → unlocked | Pulse generation → Below 1 V | FR Door Lock Pos |
| 4D-13 (LSFL) - Body ground | W - Body ground | Input | Front door LH unlock detection switch input | Front door LH locked → unlocked | Pulse generation → Below 1 V | FL Door Lock Pos |
| G43-20 (LSWR) - Body ground*11 | L - Body ground | Input | Rear door RH unlock detection switch input | Rear door RH locked → unlocked | Pulse generation → Below 1 V | RR-Door Lock Pos SW |
| 4D-14 (LSWL) - Body ground*11 | GR - Body ground | Input | Rear door LH unlock detection switch signal | Rear door LH locked → unlocked | Pulse generation → Below 1 V | RL-Door Lock Pos SW |
| 4D-14 (LSWL) - Body ground*10 | GR - Body ground | Input | Rear door LH and RH unlock detection switch input | Rear door RH and LH locked → Rear door RH or LH unlocked | Pulse generation → Below 1 V | RL-Door Lock Pos SW |
| 4N-34 (BCTY) - Body ground*1*9 | LA-B - Body ground | Input | Back door courtesy light switch input | Back door closed | Below 1 V | Back Door Courtesy SW |
| Back door open | Pulse generation | |||||
| 4H-34 (BCTY) - Body ground*1*8 | B - Body ground | Input | Back door courtesy light switch input | Back door closed | Below 1 V | Back Door Courtesy SW |
| Back door open | Pulse generation | |||||
| 4H-34 (BCTY) - Body ground*2 | B - Body ground | Input | Back door courtesy light switch input | Back door closed | Below 1 V | Back Door Courtesy SW |
| Back door open | Pulse generation | |||||
| 4N-20 (TR+) - Body ground*1*3*9 | LA-B - Body ground | Input | Back door lock motor drive output | Back door closed → open | Below 1 V → 11 to 14 V → Below 1 V | - |
| 4H-20 (TR+) - Body ground*1*3*8 | LA-B - Body ground | Input | Back door lock motor drive output | Back door closed → open | Below 1 V → 11 to 14 V → Below 1 V | - |
| 4H-20 (TR+) - Body ground*3*2 | LA-B - Body ground | Input | Back door lock motor drive output | Back door closed → open | Below 1 V → 11 to 14 V → Below 1 V | - |
| 4D-16 (L1) - Body ground*12 | LG - Body ground | Input | Front passenger door control switch input | Front passenger door control switch off → on (lock) | Pulse generation → Below 1 V | Door Lock SW-Lock |
| 4A-39 (UL1) - Body ground*12 | GR - Body ground | Input | Front passenger door control switch input | Front passenger door control switch off → on (unlock) | Pulse generation → Below 1 V | Door Lock SW-Unlock |
| G45-13 (BDSU) - Body ground*4 | B - Body ground | Input | Back door opener switch input | Back door opener switch assembly (open switch) off → on | Pulse generation → Below 1 V | Back Door Open Handle SW |
| G44-9 (ACTG) - Body ground*7 | GR - Body ground | Output | Collision door lock release signal | Collision door lock release function does not operate | Below 2 V*5
7.3 to 9.9 V*6 |
- |
| Collision door lock release function operates | Below 1 V | |||||
| 4A-7 (GSW) - Body ground | B - Body ground | Input | Collision detection input | Ignition switch ON | 2.9 to 4.2 V | - |
*1: for LHD
*2: for RHD
*3: w/o Power Back Door System
*4: w/o Entry Function
*5: Door control battery not charged
*6: Door control battery charging or charged
*7: w/ Door Control Battery
*8: except Manual Transaxle
*9: for Manual Transaxle
*10: w/o Memory Call Function
*11: w/ Memory Call Function
*12: w/ Door Control Switch Assembly
CHECK CERTIFICATION ECU (SMART KEY ECU ASSEMBLY) (w/ Entry and Start System)
Disconnect the G54 certification ECU (smart key ECU assembly) connector.
Measure the voltage and resistance according to the value(s) in the table below.
| Tester Connection | Wiring Color | Input/Output | Terminal Description | Condition | Specified Condition | Related Data List Item |
|---|---|---|---|---|---|---|
| G54-18 (E) - Body ground | W-B - Body ground | - | Ground | Always | Below 1 Ω | - |
| G54-4 (+B) - Body ground | P - Body ground | Input | Auxiliary battery power supply | Ignition switch off | 11 to 14 V | - |
Reconnect the M7 certification ECU (smart key ECU assembly) connector.
Measure the voltage and check for pulses according to the value(s) in the table below.
| Tester Connection | Wiring Color | Input/Output | Terminal Description | Condition | Specified Condition | Related Data List Item |
|---|---|---|---|---|---|---|
| M7-26 (TSW5) - Body ground | B - Body ground | Input | Back door opener switch input | Back door opener switch assembly (open switch) off → on | Below 1 V → Pulse generation | Entry&Start
Tr/B-Door Unlock SW |
CHECK DOUBLE LOCK DOOR CONTROL RELAY ASSEMBLY (w/ Double Locking System)
Disconnect the A28 double lock door control relay assembly connector.
Measure the voltage and resistance according to the value(s) in the table below.
| Tester Connection | Wiring Color | Input/Output | Terminal Description | Condition | Specified Condition | Related Data List Item |
|---|---|---|---|---|---|---|
| A28-12 (+B) - Body ground | P - Body ground | Input | Battery power supply | Ignition switch off | 11 to 14 V | - |
| A28-11 (CPUB) - Body ground | LA-GR - Body ground | Input | Battery power supply | Ignition switch off | 11 to 14 V | - |
| A28-7 (GND) - Body ground | W-B - Body ground | - | Ground | Always | Below 1 Ω | - |
Reconnect the A28 double lock door control relay assembly connector.
Measure the voltage and check for pulses according to the value(s) in the table below.
| Tester Connection | Wiring Color | Input/Output | Terminal Description | Condition | Specified Condition | Related Data List Item |
|---|---|---|---|---|---|---|
| A28-8 (ACTS) - Body ground | LA-P - Body ground | Output | All door double lock motor set on output | Double lock unset → set | Below 1 V → 11 to 14 V | - |
| A28-1 (ACTR) - Body ground | LA-SB - Body ground | Output | All door double lock motor set off output | Double lock set → unset | Below 1 V → 11 to 14 V | - |
| A28-6 (DLPD) - Body ground | LA-W - Body ground | Input | Driver door double lock position switch input | Double lock unset → set | Pulse generation → Below 1 V | - |
| A28-5 (DLPP) - Body ground | LA-R - Body ground | Input | Front passenger door double lock position switch input | Double lock unset → set | Pulse generation → Below 1 V | - |
| A28-4 (DLPR) - Body ground | LA-G - Body ground | Input | Rear door RH double lock position switch input | Double lock unset → set | Pulse generation → Below 1 V | - |
| A28-3 (DLPL) - Body ground | LA-V - Body ground | Input | Rear door LH double lock position switch input | Double lock unset → set | Pulse generation → Below 1 V | - |
CHECK AIRBAG SENSOR ASSEMBLY
for HV Model with Occupant Classification System:
for Gasoline Model with Occupant Classification System:
w/o Occupant Classification System: