CHECK INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY AND MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)
| *1 | Main body ECU (multiplex network body ECU) | - | - |
| *A | except LHD, Manual Transaxle | *B | for LHD, Manual Transaxle |
Remove the main body ECU (multiplex network body ECU) from the instrument panel junction block assembly.
for LHD: Click herePower Source / Network>POWER DISTRIBUTION>MAIN BODY ECU (for LHD)>REMOVAL
for RHD: Click herePower Source / Network>POWER DISTRIBUTION>MAIN BODY ECU (for RHD)>REMOVAL
Reconnect the instrument panel junction block assembly connectors.
Measure the voltage and resistance according to the value(s) in the table below.
| Tester Connection | Wiring Color | Input/Output | Terminal Description | Condition | Specified Condition | Related Data List Item |
|---|---|---|---|---|---|---|
| A-11 (GND1) - Body ground | - | - | Ground | Always | Below 1 Ω | - |
| A-30 (ACC) - Body ground | - | Input | ACC power supply | Ignition switch ACC | 11 to 14 V | ACC SW |
| Ignition switch off | Below 1 V | |||||
| A-31 (BECU) - Body ground | - | Input | Battery power supply | Always | 11 to 14 V | - |
| A-32 (IG) - Body ground | - | Input | IG power supply | Ignition switch ON | 11 to 14 V*1
10.5 to 16 V*2 |
IG SW |
| Ignition switch off | Below 1 V |
*1: except Manual Transaxle, with Stop and Start System
*2: for Manual Transaxle, with Stop and Start System
Install the main body ECU (multiplex network body ECU) to the instrument panel junction block assembly.
for LHD: Click herePower Source / Network>POWER DISTRIBUTION>MAIN BODY ECU (for LHD)>INSTALLATION
for RHD: Click herePower Source / Network>POWER DISTRIBUTION>MAIN BODY ECU (for RHD)>INSTALLATION
Measure the voltage according to the value(s) in the table below.
| Terminal No. (Symbol) | Wiring Color | Input/Output | Terminal Description | Condition | Specified Condition | Related Data List Item |
|---|---|---|---|---|---|---|
| G44-1 (FLCY) - Body ground*1 | R- Body ground | Input | Front door courtesy light switch LH input | Front door LH open → closed | Below 1 V → 4.7 to 5.3 V | FL Door Courtesy SW |
| G44-6 (FRCY) - Body ground*2 | BE- Body ground | Input | Front door courtesy light switch RH input | Front door RH open → closed | Below 1 V → 4.7 to 5.3 V | FR Door Courtesy SW |
| 4A-41 (KSW) - Body ground | GR - Body ground | Input | Un-lock warning switch input | No key in ignition key cylinder → Key in ignition key cylinder | 11 to 14 V → Below 1 V | Key Unlock Warning SW |
*1: for LHD
*2: for RHD