86520
1.INSTALL LOW PITCHED HORN ASSEMBLY (w/ NO. 1 Radiator to Support Seal)
| *a | Location |
|
Bolt |
|
Connector |
Connect the connector.
Align the stay of the low pitched horn assembly with the location on the body side.
Install the low pitched horn assembly with the bolt.
86510
2.INSTALL HIGH PITCHED HORN ASSEMBLY (w/ NO. 1 Radiator to Support Seal)
| *a | Location |
|
Bolt |
|
Connector |
Connect the connector.
Align the stay of the high pitched horn assembly with the location on the body side.
Install the high pitched horn assembly with the bolt.
3.INSTALL FRONT BUMPER ASSEMBLY (w/ NO. 1 Radiator to Support Seal)
86520
4.INSTALL LOW PITCHED HORN ASSEMBLY (w/o NO. 1 Radiator to Support Seal)
| *a | Location |
|
Bolt |
|
Connector |
Connect the connector.
Align the stay of the low pitched horn assembly with the location on the body side.
Install the low pitched horn assembly with the bolt.
86510
5.INSTALL HIGH PITCHED HORN ASSEMBLY (w/o NO. 1 Radiator to Support Seal)
| *a | Location |
|
Bolt |
|
Connector |
Connect the connector.
Align the stay of the high pitched horn assembly with the location on the body side.
Install the high pitched horn assembly with the bolt.
16681A
6.INSTALL RADIATOR UPPER AIR GUIDE PLATE (w/o NO. 1 Radiator to Support Seal)
53510
7.INSTALL HOOD LOCK ASSEMBLY (w/o NO. 1 Radiator to Support Seal)
17750A
8.INSTALL INLET AIR CLEANER ASSEMBLY (for Gasoline Model, w/o NO. 1 Radiator to Support Seal)
for A25A-FKS:
Click hereEngine / Hybrid System>A25A-FKS (ENGINE CONTROL)>THROTTLE BODY>INSTALLATION
for M20A-FKS:
Click hereEngine / Hybrid System>M20A-FKS (ENGINE CONTROL)>THROTTLE BODY>INSTALLATION
86790
9.ADJUST FRONT TELEVISION CAMERA ASSEMBLY (w/ Panoramic View Monitor System, w/ NO. 1 Radiator to Support Seal)
for Gasoline Model:
10.PERFORM CALIBRATION (w/ Parking Support Brake System, w/ NO. 1 Radiator to Support Seal)
for Gasoline Model:
53301
11.INSPECT HOOD SUB-ASSEMBLY