CHECK INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY AND MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)
| *A | except LHD, Manual Transaxle | *B | for LHD, Manual Transaxle |
| *1 | Main Body ECU (Multiplex Network Body ECU) | - | - |
Remove the main body ECU (multiplex network body ECU) from the instrument panel junction block assembly.
for LHD:
Click herePower Source / Network>POWER DISTRIBUTION>MAIN BODY ECU (for LHD)>REMOVAL
for RHD:
Click herePower Source / Network>POWER DISTRIBUTION>MAIN BODY ECU (for RHD)>REMOVAL
Connect the instrument panel junction block assembly connectors.
Measure the voltage and resistance according to the value(s) in the table below.
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
|
*1: for Manual Transaxle with Stop and Start System *2: except Manual Transaxle with Stop and Start System |
||||
| A-32 (IG) - Body ground | None - Body ground | Ignition power supply | Ignition switch ON | 11 to 14 V*1
10.5 to 16 V*2 |
| Ignition switch off | Below 1 V | |||
| A-31 (BECU) - Body ground | None - Body ground | Auxiliary battery power supply | Ignition switch off | 11 to 14 V |
| A-30 (ACC) - Body ground | None - Body ground | ACC power supply | Ignition switch ACC | 11 to 14 V |
| Ignition switch off | Below 1 V | |||
| A-11 (GND1) - Body ground | None - Body ground | Ground | Always | Below 1 Ω |
Install the main body ECU (multiplex network body ECU).
Measure the voltage and pulse according to the value(s) in the table below.
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
|
*1: for LHD, Manual Transaxle *2: except LHD, Manual Transaxle *3: w/ Memory Call Function *4: w/o Memory Call Function *5: w/ Footwell Light |
||||
| G44-1 (FLCY) - Body ground | R - Body ground | Front door courtesy light switch assembly LH input | Front door LH open | Below 1 V |
| Front door LH closed | 4.7 to 5.3 V | |||
| G44-6 (FRCY) - Body ground | BE - Body ground | Front door courtesy light switch assembly RH input | Front door RH open | Below 1 V |
| Front door RH closed | 4.7 to 5.3 V | |||
| 4H-24 - Body ground*2 | G - Body ground | Rear door courtesy light switch assembly LH input | Rear door LH open | Below 1 V |
| Rear door LH closed | 4.7 to 5.3 V | |||
| 4N-24 - Body ground*1 | LA-R - Body ground | Rear door courtesy light switch assembly LH input | Rear door LH open | Below 1 V |
| Rear door LH closed | 4.7 to 5.3 V | |||
| 4A-31 - Body ground | LA-V - Body ground | Rear door courtesy light switch assembly RH input | Rear door RH open | Below 1 V |
| Rear door RH closed | 4.7 to 5.3 V | |||
| 4H-34 - Body ground*2 | B - Body ground | Back door courtesy light switch input | Back door open | Below 1 V |
| Back door closed | 4.7 to 5.3 V | |||
| 4N-34 - Body ground*1 | LA-GR - Body ground | Back door courtesy light switch input | Back door open | Below 1 V |
| Back door closed | 4.7 to 5.3 V | |||
| 4D-13 - Body ground | W - Body ground | Front door LH unlock detection switch input | Front door LH locked | Pulse generation |
| Front door LH unlocked | Below 1 V | |||
| 4D-12 - Body ground | W - Body ground | Front door RH unlock detection switch input | Front door RH locked | Pulse generation |
| Front door RH unlocked | Below 1 V | |||
| 4D-14 - Body ground*3 | GR - Body ground | Rear door LH unlock detection switch input | Rear door LH locked | Pulse generation |
| Rear door LH unlocked | Below 1 V | |||
| 4D-14 - Body ground*4 | GR - Body ground | Rear door LH and rear door RH unlock detection switch input | Rear door LH or rear door RH locked | Pulse generation |
| Rear door LH and rear door RH unlocked | Below 1 V | |||
| G43-20 (LSWR) - Body ground*3 | L - Body ground | Rear door RH unlock detection switch input | Rear door RH locked | Pulse generation |
| Rear door RH unlocked | Below 1 V | |||
| G44-20 (BCYL) - Body ground | GR - Body ground | No. 1 luggage compartment light assembly output | No. 1 luggage compartment light assembly off | 11 to 14 V |
| No. 1 luggage compartment light assembly on | Below 1 V | |||
| 4A-36 - Body ground*5 | LA-B - Body ground | No. 1 interior illumination light assembly (footwell light) output | No. 1 interior illumination light assembly (footwell light) off | 11 to 14 V |
| No. 1 interior illumination light assembly (footwell light) on | Below 1 V | |||
| 4A-37 - Body ground*5 | B - Body ground | No. 2 interior illumination light assembly (footwell light) output | No. 2 interior illumination light assembly (footwell light) off | 11 to 14 V |
| No. 2 interior illumination light assembly (footwell light) on | Below 1 V | |||
| 4D-10 - Body ground | B - Body ground | Map light assembly, visor light assembly power supply | DOME CUT relay off | 11 to 14 V |
| DOME CUT relay on | Below 1 V | |||
| 4H-19 - Body ground*2 | LG - Body ground | No. 1 luggage compartment light assembly input | DOME CUT relay off | 11 to 14 V |
| DOME CUT relay on | Below 1 V | |||
| 4N-19 - Body ground*1 | LA-L - Body ground | No. 1 luggage compartment light assembly input | DOME CUT relay off | 11 to 14 V |
| DOME CUT relay on | Below 1 V | |||
| 4A-53 - Body ground | L - Body ground | Taillight signal | Ignition switch ON, light control switch TAIL | 11 to 14 V |
| Ignition switch ON, light control switch off | Below 1 V | |||
| 4H-22 - Body ground*2 | LA-W - Body ground | Taillight signal | Ignition switch ON, light control switch TAIL | 11 to 14 V |
| Ignition switch ON, light control switch off | Below 1 V | |||
| 4N-22 - Body ground*1 | LA-W - Body ground | Taillight signal | Ignition switch ON, light control switch TAIL | 11 to 14 V |
| Ignition switch ON, light control switch off | Below 1 V | |||
| 4D-29 - Body ground | LA-L - Body ground | Interior lights drive output | Interior lights off (when operated by illuminated entry system) | 11 to 14 V |
| Interior lights on (when operated by illuminated entry system) | Below 1 V | |||
CHECK CERTIFICATION ECU (SMART KEY ECU ASSEMBLY) (w/ Entry and Start System for HV Model)
Disconnect the G54 certification ECU (smart key ECU assembly) connector.
Measure the voltage and resistance according to the value(s) in the table below.
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
| G54-4 (+B) - Body ground | P - Body ground | Auxiliary battery power supply | Ignition switch off | 11 to 14 V |
| G54-15 (CUTB) - Body ground | V - Body ground | Auxiliary battery power supply | Ignition switch off | 11 to 14 V |
| G54-18 (E) - Body ground | W-B - Body ground | Ground | Always | Below 1 Ω |
Reconnect the G54 certification ECU (smart key ECU assembly) connector.
Measure the voltage according to the value(s) in the table below.
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
| G54-10 (SWIL) - G54-11 (AGND) | W - BE | Push start switch illumination drive output | Push start switch illumination on | 11 to 14 V |
| Push start switch illumination off | Below 1 V |
CHECK CERTIFICATION ECU (SMART KEY ECU ASSEMBLY) (w/ Entry and Start System for Gasoline Model)
Disconnect the G54 certification ECU (smart key ECU assembly) connector.
Measure the voltage and resistance according to the value(s) in the table below.
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
| G54-4 (+B) - Body ground | P - Body ground | Auxiliary battery power supply | Ignition switch off | 11 to 14 V |
| G54-15 (CUTB) - Body ground | V - Body ground | Auxiliary battery power supply | Ignition switch off | 11 to 14 V |
| G54-18 (E) - Body ground | W-B - Body ground | Ground | Always | Below 1 Ω |
Reconnect the G54 certification ECU (smart key ECU assembly) connector.
Measure the voltage according to the value(s) in the table below.
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
| G54-10 (SWIL) - G54-11 (AGND) | W - BE | Push start switch illumination drive output | Push start switch illumination on | 11 to 14 V |
| Push start switch illumination off | Below 1 V |