Home › Suspension › FRONT SUSPENSION › FRONT LOWER SUSPENSION ARM › 2018.10–2019.02
RM3620E _53 Suspension _076490 FRONT SUSPENSION _0372227 FRONT LOWER SUSPENSION ARM A

FRONT SUSPENSION  FRONT LOWER SUSPENSION ARM  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH side and LH side.

·

The following procedure is for the LH side.



PROCEDURE

Hide 48069 1.INSTALL FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY

a.

Install the front lower arm bushing stopper to the front lower No. 1 suspension arm sub-assembly.


b.
C403151N01
0.573,0.385 0.75,0.583 0.177,0.198 10 true 1 2.01,1.167 2.167,1.333 0.156,0.167 10 false 3 1.063,0.25 1.219,0.438 0.156,0.188 10 true 2

Install the front lower No. 1 suspension arm sub-assembly to the front frame assembly with the 3 bolts and nut in the order shown in the illustration.

Torque:
Bolt (1), (2) : 200 N*m (2039 kgf*cm, 148 ft.*lbf)
Bolt (3) : 135 N*m (1377 kgf*cm, 100 ft.*lbf)

NOTICE:

Because the nut has its own stopper, do not turn the nut. Tighten the bolt with the nut secured.



c.

Connect the front lower No. 1 suspension arm sub-assembly to the front lower ball joint assembly with the bolt and 2 nuts.

Torque:
92 N*m (938 kgf*cm, 68 ft.*lbf)


Hide 58166A 4.INSTALL FRONT FLOOR COVER LH (for LH Side)

Hide 58166A 5.INSTALL FRONT FLOOR COVER RH (for RH Side)

Hide 6.INSTALL ENGINE UNDER COVER HEAT INSULATOR (for A25A-FXS)

Hide 11.INSTALL FRONT WHEEL

Hide 12.INSPECT AND ADJUST FRONT WHEEL ALIGNMENT

Hide 13.PERFORM INITIALIZATION

for HV Model:
Parking Support Brake System (for HV model) (Click here)
Parking Assist Monitor System (Click here)
Panoramic View Monitor System (for HV model) (Click here)
Lighting System (EXT) (Click here)

for Gasoline Model:
Parking Support Brake System (for Gasoline model) (Click here)
Parking Assist Monitor System (Click here)
Panoramic View Monitor System (for Gasoline model) (Click here)
Lighting System (EXT) (Click here)