Home › Vehicle Interior › SEAT › SEAT HEATER SYSTEM › 2018.10–2019.02
RM3620E _58 Vehicle Interior _076405 SEAT _0374976 SEAT HEATER SYSTEM J

SEAT  SEAT HEATER SYSTEM  Seat Heater for Front Right Seat does not Operate  


DESCRIPTION

When the RH side refreshing seat switch (seat heater switch) is operated, the air conditioning amplifier assembly receives the signal. The air conditioning amplifier assembly receives the signal and operates the RH side front seat heater.

WIRING DIAGRAM

E409346E01
0.198,4.813 1.792,5.177 1.594,0.365 10 false Air Conditioning Amplifier Assembly 2.104,4.49 3.333,4.865 1.229,0.375 10 false Seat Heater Control Sub-assembly RH 3.938,4.458 5.667,4.833 1.729,0.375 10 false Front Seat Cushion Heater Assembly RH 5.729,4.448 7.125,4.802 1.396,0.354 10 false Front Seatback Heater Assembly RH 0.719,5.396 2.49,5.583 1.771,0.188 10 false : LIN Communication Line 5.354,1 6.813,1.365 1.458,0.365 10 false Refreshing Seat Switch (Seat Heater Switch) 1.906,1.125 2.677,1.302 0.771,0.177 10 false S/HTR F/R 3.188,0.948 4.708,1.135 1.521,0.188 10 false from S/HTR FR Relay 5.646,0.469 6.052,0.656 0.406,0.188 10 false SLIN 0.917,0.469 1.26,0.635 0.344,0.167 10 false LIN1 2.104,4.333 2.385,4.51 0.281,0.177 10 false S3 2.177,2.875 2.406,3.052 0.229,0.177 10 false B1 2.177,3.906 2.563,4.083 0.385,0.177 10 false SWR 3.083,2.885 3.313,3.063 0.229,0.177 10 false E1 3.031,3.917 3.323,4.094 0.292,0.177 10 false HIR 0.188,4.656 0.573,4.833 0.385,0.177 10 false G48 0.823,3.927 1.281,4.094 0.458,0.167 10 false SM1R 1.302,3.792 1.51,3.969 0.208,0.177 10 false 12 1.948,3.792 2.094,3.958 0.146,0.167 10 false 5 1.969,2.771 2.115,2.938 0.146,0.167 10 false 1 3.344,2.76 3.552,2.938 0.208,0.177 10 false 10 3.365,3.792 3.51,3.979 0.146,0.188 10 false 7 3.927,3.906 4.219,4.073 0.292,0.167 10 false S17 3.927,2.875 4.219,3.042 0.292,0.167 10 false S17 3.917,1.927 4.208,2.094 0.292,0.167 10 false S17 4.01,3.646 4.135,3.833 0.125,0.188 10 false 1 4.01,2.625 4.135,2.813 0.125,0.188 10 false 6 4.01,1.688 4.135,1.875 0.125,0.188 10 false 2

CAUTION / NOTICE / HINT

NOTICE:
·

If the auxiliary battery voltage is low, the seat heater system may not operate. When "High Power Consumption Partial Limit on AC/Heater Operation" is displayed on the multi-information display in the combination meter assembly, inspect the auxiliary battery, referring to On-vehicle Inspection for the charging system.

for A25A-FKS: Click herePower Source / Network>A25A-FKS (BATTERY / CHARGING)>CHARGING SYSTEM>ON-VEHICLE INSPECTION

for M20A-FKS: Click herePower Source / Network>M20A-FKS (BATTERY / CHARGING)>CHARGING SYSTEM>ON-VEHICLE INSPECTION

for A25A-FXS: Click herePower Source / Network>A25A-FXS (BATTERY / CHARGING)>CHARGING SYSTEM>ON-VEHICLE INSPECTION

·

If the auxiliary battery voltage is low, the seat heater system may not operate. When "High Power Consumption Partial Limit On AC/Heater Operation" is not displayed on the multi-information display in the combination meter assembly, check the Data List item "Battery Control Count (Body ECU)".

Click hereSteering>POWER ASSIST SYSTEMS>POWER STEERING SYSTEM>DATA LIST / ACTIVE TEST



HINT:

Inspect the fuse related to this system before inspecting the suspected areas below.


PROCEDURE

1.PERFORM ACTIVE TEST USING GTS (SEAT HEATER)
a.

Connect the GTS to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Enter the following menus: Body Electrical / Air Conditioner / Active Test.


e.

Perform the Active Test according to the display on the GTS.

Body Electrical > Air Conditioner > Active Test
Tester Display Measurement Item Control Range Diagnostic Note
Front Right Seat Heater RH side front seat heater operation OFF/ON -
Body Electrical > Air Conditioner > Active Test
Tester Display
Front Right Seat Heater
50004 121 116
OK:

RH side front seat heater operates normally.



Result:
Proceed to
OK
NG



OK

2.REPLACE REFRESHING SEAT SWITCH (SEAT HEATER SWITCH)

NG

4.CHECK HARNESS AND CONNECTOR (SEAT HEATER CONTROL SUB-ASSEMBLY RH - BATTERY)
2.REPLACE REFRESHING SEAT SWITCH (SEAT HEATER SWITCH)
a.

Replace the refreshing seat switch (seat heater switch) with a new or known good one.

Click hereVehicle Interior>SEAT>SEAT HEATER SWITCH (for Front Seat)>REMOVAL


Result:
Proceed to
NEXT



NEXT

3.CHECK FRONT SEAT HEATER OPERATION
3.CHECK FRONT SEAT HEATER OPERATION
a.

Check the RH side front seat heater operation.

Click hereVehicle Interior>SEAT>SEAT HEATER SYSTEM>OPERATION CHECK

OK:

RH side front seat heater operates normally.



Result:
Proceed to
OK
NG



OK

END (REFRESHING SEAT SWITCH [SEAT HEATER SWITCH] WAS DEFECTIVE)

NG

REPLACE AIR CONDITIONING AMPLIFIER ASSEMBLY

4.CHECK HARNESS AND CONNECTOR (SEAT HEATER CONTROL SUB-ASSEMBLY RH - BATTERY)
a.
B480034C13
1.563,0.281 1.917,0.552 0.354,0.271 0.875,1.896 0.99,1.896 0.99,1.896 1.313,1.302 true 1.646,0.333 1.896,0.51 0.25,0.177 10 false S3 0.208,0.104 0.458,0.281 0.25,0.177 10 false *a 0.677,1.823 0.885,1.99 0.208,0.167 10 false B1
*a Front view of wire harness connector
(to Seat Heater Control Sub-assembly RH)


Disconnect the seat heater control sub-assembly RH connector.


b.

Measure the voltage according to the value(s) in the table below.

Standard Voltage:
Tester Connection Switch Condition Specified Condition
S3-1 (B1) - Body ground Ignition switch ON 11 to 14 V
S3-1 (B1) - Body ground Ignition switch off Below 1 V



Result:
Proceed to
OK
NG



OK

5.CHECK HARNESS AND CONNECTOR (AIR CONDITIONING AMPLIFIER ASSEMBLY - SEAT HEATER CONTROL SUB-ASSEMBLY RH)

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

5.CHECK HARNESS AND CONNECTOR (AIR CONDITIONING AMPLIFIER ASSEMBLY - SEAT HEATER CONTROL SUB-ASSEMBLY RH)
a.

Disconnect the G48 air conditioning amplifier assembly connector.


b.

Disconnect the S3 seat heater control sub-assembly RH connector.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
G48-12 (SM1R) - S3-5 (SWR) Always Below 1 Ω
G48-12 (SM1R) or S3-5 (SWR) - Other terminals and body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

6.CHECK HARNESS AND CONNECTOR (FRONT SEAT CUSHION HEATER ASSEMBLY RH - SEAT HEATER CONTROL SUB-ASSEMBLY RH AND BODY GROUND)

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

6.CHECK HARNESS AND CONNECTOR (FRONT SEAT CUSHION HEATER ASSEMBLY RH - SEAT HEATER CONTROL SUB-ASSEMBLY RH AND BODY GROUND)
a.

Disconnect the S17 front seat cushion heater assembly RH connector.


b.

Disconnect the S3 seat heater control sub-assembly RH connector.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
S17-6 - S3-10 (E1) Always Below 1 Ω
S17-6 or S3-10 (E1) - Other terminals and body ground Always 10 kΩ or higher
S17-1 - S3-7 (HIR) Always Below 1 Ω
S17-1 or S3-7 (HIR) - Other terminals and body ground Always 10 kΩ or higher
S17-2 - Body ground Always Below 1 Ω



Result:
Proceed to
OK
NG



OK

7.INSPECT FRONT SEAT CUSHION HEATER ASSEMBLY RH

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

7.INSPECT FRONT SEAT CUSHION HEATER ASSEMBLY RH
a.

Remove the front seat cushion heater assembly RH.

for Manual Seat: Click hereVehicle Interior>SEAT>FRONT SEAT CUSHION HEATER (for Manual Seat)>REMOVAL

for Power Seat: Click hereVehicle Interior>SEAT>FRONT SEAT CUSHION HEATER (for Power Seat)>REMOVAL


b.

Inspect the front seat cushion heater assembly RH.

for Manual Seat: Click hereVehicle Interior>SEAT>FRONT SEAT CUSHION HEATER (for Manual Seat)>INSPECTION

for Power Seat: Click hereVehicle Interior>SEAT>FRONT SEAT CUSHION HEATER (for Power Seat)>INSPECTION


Result:
Proceed to
OK
NG



OK

8.INSPECT FRONT SEATBACK HEATER ASSEMBLY RH

NG

REPLACE FRONT SEAT CUSHION HEATER ASSEMBLY RH

8.INSPECT FRONT SEATBACK HEATER ASSEMBLY RH
a.

Remove the front seatback heater assembly RH.

for Manual Seat: Click hereVehicle Interior>SEAT>FRONT SEATBACK HEATER (for Manual Seat)>REMOVAL

for Power Seat: Click hereVehicle Interior>SEAT>FRONT SEATBACK HEATER (for Power Seat)>REMOVAL


b.

Inspect the front seatback heater assembly RH.

for Manual Seat: Click hereVehicle Interior>SEAT>FRONT SEATBACK HEATER (for Manual Seat)>INSPECTION

for Power Seat: Click hereVehicle Interior>SEAT>FRONT SEATBACK HEATER (for Power Seat)>INSPECTION


Result:
Proceed to
OK
NG



OK

9.REPLACE SEAT HEATER CONTROL SUB-ASSEMBLY RH

NG

REPLACE FRONT SEATBACK HEATER ASSEMBLY RH

9.REPLACE SEAT HEATER CONTROL SUB-ASSEMBLY RH
a.

Replace the seat heater control sub-assembly RH with a new or known good one.

for Manual Seat: Click hereVehicle Interior>SEAT>SEAT HEATER CONTROL (for Manual Seat)>REMOVAL

for Power Seat: Click hereVehicle Interior>SEAT>SEAT HEATER CONTROL (for Power Seat)>REMOVAL


Result:
Proceed to
NEXT



NEXT

10.CHECK FRONT SEAT HEATER OPERATION
10.CHECK FRONT SEAT HEATER OPERATION
a.

Check the RH side front seat heater operation.

Click hereVehicle Interior>SEAT>SEAT HEATER SYSTEM>OPERATION CHECK

OK:

RH side front seat heater operates normally.



Result:
Proceed to
OK
NG



OK

END (SEAT HEATER CONTROL SUB-ASSEMBLY RH WAS DEFECTIVE)

NG

REPLACE AIR CONDITIONING AMPLIFIER ASSEMBLY