Wear protective gloves. Sharp areas on the parts may injure your hands.
There is risk of injury.
Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
87501A
1.INSTALL SEAT HEATER CONTROL SUB-ASSEMBLY RH
Connect the connector.
Attach the claw to install the seat heater control sub-assembly RH.
2.INSTALL FRONT SEAT ASSEMBLY RH
Use the same procedure described for the LH side.
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for Manual Seat)>INSTALLATION
3. PERFORM ZERO POINT CALIBRATION AND SENSITIVITY CHECK (w/ Occupant Classification System)
4.INSPECT SEAT HEATER SYSTEM
5.INSPECT CLIMATE CONTROL SEAT SYSTEM
for HV Model:
Click hereVehicle Interior>SEAT>CLIMATE CONTROL SEAT SYSTEM (for HV Model)>OPERATION CHECK
for Gasoline Model:
Click hereVehicle Interior>SEAT>CLIMATE CONTROL SEAT SYSTEM (for Gasoline Model)>OPERATION CHECK
6. PERFORM DIAGNOSTIC SYSTEM CHECK
for HV Model with Occupant Classification System:
for Gasoline Model with Occupant Classification System:
w/o Occupant Classification System:
7.CHECK SRS WARNING LIGHT
for HV Model with Occupant Classification System:
for Gasoline Model with Occupant Classification System:
w/o Occupant Classification System:
8.INSPECT SEAT BELT WARNING SYSTEM
w/ Occupant Classification System:
w/o Occupant Classification System: