Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › REAR BUMPER › 2018.10–2019.02
RM3620E _59 Vehicle Exterior _076404 EXTERIOR PANELS / TRIM _0377694 REAR BUMPER A

EXTERIOR PANELS / TRIM  REAR BUMPER  INSTALLATION  


PROCEDURE

Hide 52023 1.INSTALL REAR BUMPER REINFORCEMENT SUB-ASSEMBLY

a.

for Type A:

i.
B524037C01
0,0 0,0 false
V113147

Install in this Direction


Attach the guide to set the rear bumper reinforcement sub-assembly.


ii.
B523958

Install the rear bumper reinforcement sub-assembly with the 6 bolts.

Torque:
29 N*m (296 kgf*cm, 21 ft.*lbf)



b.

for Type B:

i.
B524130C01
0,0 0,0 false
V113147

Install in this Direction


Attach the guide to set the rear bumper reinforcement sub-assembly.


ii.
B523957

Install the rear bumper reinforcement sub-assembly with the 6 bolts.

Torque:
29 N*m (296 kgf*cm, 21 ft.*lbf)



Hide 52156A 2.INSTALL REAR BUMPER SIDE SUPPORT LH

a.
B524032C01
0,0 0,0 false
V113147

Install in this Direction


Attach the guide and claw to install the rear bumper side support LH.


b.
B524033

Install the clip.


c.

Install the 2 screws.


Hide 52155A 3.INSTALL REAR BUMPER SIDE SUPPORT RH

HINT:

Use the same procedure for the RH and LH side.


Hide 52563A 4.INSTALL REAR BUMPER UPPER RETAINER LH

a.
B524211C01
0,0 0,0 false
V113147

Install in this Direction


Attach the guide to install the rear bumper upper retainer LH to the rear combination light assembly LH.


Hide 52562B 5.INSTALL REAR BUMPER UPPER RETAINER RH

HINT:

Use the same procedure for the RH and LH side.


Hide 6.INSTALL REAR COMBINATION LIGHT ASSEMBLY LH

a.
E404064C02
0,0 0,0 false
V113147

Install in this Direction


Pass the wire harness into the vehicle and install the grommet.


b.
B524034C02
1.25,0.75 1.469,0.938 0.219,0.188 10 true *a 0.698,1.177 0.917,1.365 0.219,0.188 10 true *b
*a Pin
*b Guide
V113147

Push in this Direction


Align the guide and pin to set the rear combination light assembly LH.


c.

Push the rear combination light assembly LH towards the vehicle front to attach the pin and guide.


d.

Install the 2 screws.


e.
B524222

Install the 2 screws.


f.
B524221

Insert your hand between the deck trim side panel assembly LH and the body and connect the connector.


Hide 7.INSTALL REAR COMBINATION LIGHT ASSEMBLY RH

HINT:

Use the same procedure for the RH and LH side.


Hide 8.INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH

a.

Return the rear side of the deck trim side panel assembly LH to its original position.

Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>INSTALLATION


Hide 9.INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH

HINT:

Use the same procedure for the RH and LH side.


Hide 58460D 10.INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY

Hide 58386 11.INSTALL REAR FLOOR FINISH PLATE

Hide 58417H 12.INSTALL REAR NO. 3 FLOOR BOARD

Hide 13.INSTALL REAR BUMPER ASSEMBLY

a.
B524035C04
1.771,1.104 1.938,1.104 false 1.948,1.01 2.146,1.198 0.198,0.188 10 true *1
*1 Back Door Garnish Retainer
V113147

Install in this Direction


Attach the claw and back door garnish retainer to set the rear bumper assembly.

HINT:

Use the same procedure for the RH and LH side.



b.
B524101C01
0,0 0,0 false
V113147

Install in this Direction


Attach the claw.

HINT:

Use the same procedure for the RH and LH side.



c.
B523951

Install the 2 clips.


d.
B524188

Install the 2 screws.


e.

Remove the protective tape.


f.

except Off Road Package:

i.
B524153

Install the clip.

HINT:

Use the same procedure for the RH and LH side.




g.

for Off Road Package:

i.
B524154

Install the clip.

HINT:

Use the same procedure for the RH and LH side.




h.
B523955

w/ TOYOTA Parking Assist-sensor System, w/ Hands Free Power Back Door:

i.

Connect the connector.



Hide 52599 14.INSTALL REAR BUMPER UPPER STOPPER

a.
B524152

Install the 2 rear bumper upper stoppers.


Hide 81498 15.INSTALL REAR COMBINATION LIGHT COVER LH

Hide 81497 16.INSTALL REAR COMBINATION LIGHT COVER RH

HINT:

Use the same procedure for the RH and LH side.


Hide 75606A 17.INSTALL QUARTER OUTSIDE MOULDING SUB-ASSEMBLY LH

a.

except Off Road Package:

i.
B524156C01
0,0 0,0 false
V113147

Install in this Direction


Attach the claw and clip to install the quarter outside moulding sub-assembly LH.


ii.
B524123C02
0,0 0,0 false
V100135

Screw
V100136

Clip


Install the screw.


iii.

Install the clip.


iv.

Remove the protective tape.



b.

for Off Road Package:

i.
B558155C02
0,0 0,0 false
V113147

Install in this Direction


Attach the guide and clip to install the quarter outside moulding sub-assembly LH.


ii.
B524124C02
0,0 0,0 false
V100135

Screw
V100136

Clip


Install the screw.


iii.

Install the clip.


iv.

Remove the protective tape.



Hide 75605A 18.INSTALL QUARTER OUTSIDE MOULDING SUB-ASSEMBLY RH

HINT:

Use the same procedure for the RH and LH side.


Hide 52592 19.INSTALL REAR BUMPER SIDE SEAL LH

a.
B524127C02
0,0 0,0 false
V100135

Clip
V100136

Screw


w/o Mudguard:

i.

Install the rear bumper side seal LH with the 3 clips.


ii.

Install the screw.



b.
B524128

w/ Mudguard:

i.

Install the rear bumper side seal LH with the 3 clips.



Hide 52591 20.INSTALL REAR BUMPER SIDE SEAL RH

a.
B523947C03
0,0 0,0 false
V100135

Clip
V100136

Screw


w/o Mudguard:

i.

Install the rear bumper side seal RH with the 4 clips.


ii.

Install the screw.



b.
B523948

w/ Mudguard:

i.

Install the rear bumper side seal RH with the 4 clips.



Hide 76626E 21.INSTALL REAR QUARTER PANEL MUDGUARD LH (w/ Mudguard)

Hide 76625G 22.INSTALL REAR QUARTER PANEL MUDGUARD RH (w/ Mudguard)

HINT:

Use the same procedure for the RH and LH side.


Hide 23.CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL (w/ Hands Free Power Back Door)



c.

for M20A-FKS:

Click hereGeneral>MAINTENANCE>M20A-FKS BATTERY>INSTALLATION

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION



Hide 65351A 24.INSTALL BATTERY HOLE COVER (for HV Model, w/ Hands Free Power Back Door)

Hide 58416K 25.INSTALL REAR NO. 2 FLOOR BOARD (for HV Model, w/ Hands Free Power Back Door)

Hide 58410B 26.INSTALL DECK BOARD ASSEMBLY (for HV Model, w/ Hands Free Power Back Door)

Hide 891B2 27.CHECK KICK DOOR CONTROL SENSOR (w/ Hands Free Power Back Door)