CHECK MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) AND INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY
| *A | except LHD, Manual Transaxle | *B | for LHD, Manual Transaxle |
| *1 | Main Body ECU (Multiplex Network Body ECU) | - | - |
Remove the main body ECU (multiplex network body ECU) from the instrument panel junction block assembly.
for LHD:
Click herePower Source / Network>POWER DISTRIBUTION>MAIN BODY ECU (for LHD)>REMOVAL
for RHD:
Click herePower Source / Network>POWER DISTRIBUTION>MAIN BODY ECU (for RHD)>REMOVAL
Reconnect the instrument panel junction block assembly connectors.
Measure the voltage and resistance according to the value(s) in the table below.
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
|
*1: except Manual Transaxle with Stop and Start System *2: for Manual Transaxle with Stop and Start System |
||||
| A-32 (IG) - Body ground | None - Body ground | Ignition power supply | Ignition switch ON | 11 to 14 V*1
10.5 to 16 V*2 |
| Ignition switch off | Below 1 V | |||
| A-31 (BECU) - Body ground | None - Body ground | Auxiliary battery power supply | Ignition switch off | 11 to 14 V |
| A-30 (ACC) - Body ground | None - Body ground | ACC power supply | Ignition switch ACC | 11 to 14 V |
| Ignition switch off | Below 1 V | |||
| A-18 (DBKL) - Body ground | None - Body ground | Driver seat belt buckle switch signal | Driver seat belt fastened | Below 1 Ω |
| Driver seat belt unfastened | 10 kΩ or higher | |||
| A-11 (GND1) - Body ground | None - Body ground | Ground | Always | Below 1 Ω |
Install the main body ECU (multiplex network body ECU).
Measure the voltage and pulse according to the value(s) in the table below.
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
|
*1: except Manual Transaxle *2: for Manual Transaxle |
||||
| 4H-24 (LCTY) - Body ground*1 | G - Body ground | Rear door courtesy light switch assembly LH input | Rear door LH open | Below 1 V |
| Rear door LH closed | 4.7 to 5.3 V | |||
| 4N-24 (LCTY) - Body ground*2 | LA-R - Body ground | Rear door courtesy light switch assembly LH input | Rear door LH open | Below 1 V |
| Rear door LH closed | 4.7 to 5.3 V | |||
| 4A-31 (RCTY) - Body ground | LA-V - Body ground | Rear door courtesy light switch assembly RH input | Rear door RH open | Below 1 V |
| Rear door RH closed | 4.7 to 5.3 V | |||
CHECK COMBINATION METER ASSEMBLY
Disconnect the G18 and G19 combination meter assembly connectors.
Measure the resistance and voltage according to the value(s) in the table below.
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
| G18-22 (B) - Body ground | B - Body ground | Auxiliary battery power supply | Ignition switch off | 11 to 14 V |
| G18-38 (IG+) - Body ground | L - Body ground*3
B - Body ground*4 |
Ignition power supply | Ignition switch ON | 11 to 14 V*1
10.5 to 16 V*2 |
| Ignition switch off | Below 1 V | |||
| G18-23 (ES) - Body ground | W-B - Body ground | Ground | Always | Below 1 Ω |
| G19-34 (PBKL) - Body ground | G - Body ground*5
B - Body ground*6 |
Front passenger seat belt buckle switch signal | Front passenger seat occupied, seat belt fastened | 10 kΩ or higher |
| Front passenger seat occupied, seat belt unfastened | Below 1 Ω | |||
| G19-18 (PBKL) - Body ground | L - Body ground | Occupant detection sensor signal | Front passenger seat occupied | Below 100 Ω |
| Front passenger seat not occupied | 1 MΩ or higher | |||
| G19-36 (RLSB) - Body ground*7 | SB - Body ground | Rear LH seat belt buckle switch signal | Rear LH seat belt fastened | 10 kΩ or higher |
| Rear LH seat belt unfastened | Below 1 Ω | |||
| G19-35 (RRSB) - Body ground*7 | LG - Body ground | Rear RH seat belt buckle switch signal | Rear RH seat belt fastened | 10 kΩ or higher |
| Rear RH seat belt unfastened | Below 1 Ω | |||
| G19-19 (RCSB) - Body ground*7 | B - Body ground | Rear center seat belt buckle switch signal | Rear center seat belt fastened | 10 kΩ or higher |
| Rear center seat belt unfastened | Below 1 Ω | |||
| G19-36 (RLSB) - Body ground*8 | SB - Body ground | Rear LH seat belt buckle switch signal | Rear LH seat occupied, seat belt fastened | Below 100 Ω |
| Rear LH seat occupied, seat belt unfastened | 1 MΩ or higher | |||
| G19-35 (RRSB) - Body ground*8 | LG - Body ground | Rear RH seat belt buckle switch signal | Rear RH seat occupied, seat belt fastened | Below 100 Ω |
| Rear RH seat occupied, seat belt unfastened | 1 MΩ or higher | |||
| G19-19 (RCSB) - Body ground*8 | B - Body ground | Rear center seat belt buckle switch signal | Rear center seat occupied, seat belt fastened | Below 100 Ω |
| Rear center seat occupied, seat belt unfastened | 1 MΩ or higher |
*1: w/o Stop and Start System
*2: w/ Stop and Start System
*3: except RHD with Stop and Start System
*4: for RHD with Stop and Start System
*5: for LHD
*6: for RHD
*7: w/ Rear Seat Belt Warning System without Rear Seat Occupant Detection Sensor
*8: w/ Rear Seat Belt Warning System and Rear Seat Occupant Detection Sensor