Home › Vehicle Exterior › HORN › HORN › from 2019.02
RM3620E _59 Vehicle Exterior _076278 HORN _0371457 HORN A

HORN  HORN  INSTALLATION  


PROCEDURE

Hide 86520 1.INSTALL LOW PITCHED HORN ASSEMBLY (w/ NO. 1 Radiator to Support Seal)

a.
B515711C01
0.781,0.948 0.427,0.948 true 0.292,0.833 0.552,1.073 0.26,0.24 10 true *a
*a Location
V100135

Bolt
V100136

Connector


Connect the connector.


b.

Align the stay of the low pitched horn assembly with the location on the body side.


c.

Install the low pitched horn assembly with the bolt.

Torque:
23 N*m (235 kgf*cm, 17 ft.*lbf)


Hide 86511 2.INSTALL HIGH PITCHED HORN COVER (w/o NO. 1 Radiator to Support Seal, w/ Cover)

a.
B533078

Attach the claw and install the new high pitched horn cover.

NOTICE:

Be sure to replace the high pitched horn cover with a new one.



Hide 86510 3.INSTALL HIGH PITCHED HORN ASSEMBLY (w/ NO. 1 Radiator to Support Seal)

a.
B515712C01
0.458,0.865 0.75,0.865 true 0.229,0.781 0.51,1.021 0.281,0.24 10 true *a
*a Location
V100135

Bolt
V100136

Connector


Connect the connector.


b.

Align the stay of the high pitched horn assembly with the location on the body side.


c.

Install the high pitched horn assembly with the bolt.

Torque:
23 N*m (235 kgf*cm, 17 ft.*lbf)


Hide 4.INSTALL FRONT BUMPER ASSEMBLY (w/ NO. 1 Radiator to Support Seal)

Hide 86520 5.INSTALL LOW PITCHED HORN ASSEMBLY (w/o NO. 1 Radiator to Support Seal)

a.
B515638C01
0.354,0.625 0.719,0.625 true 0.135,0.552 0.396,0.813 0.26,0.26 10 true *a
*a Location
V100135

Bolt
V100136

Connector


Connect the connector.


b.

Align the stay of the low pitched horn assembly with the location on the body side.


c.

Install the low pitched horn assembly with the bolt.

Torque:
23 N*m (235 kgf*cm, 17 ft.*lbf)


Hide 86510 6.INSTALL HIGH PITCHED HORN ASSEMBLY (w/o NO. 1 Radiator to Support Seal)

a.
B515636C01
0.365,0.604 0.698,0.604 true 0.167,0.542 0.406,0.813 0.24,0.271 10 true *a
*a Location
V100135

Bolt
V100136

Connector


Connect the connector.


b.

Align the stay of the high pitched horn assembly with the location on the body side.


c.

Install the high pitched horn assembly with the bolt.

Torque:
23 N*m (235 kgf*cm, 17 ft.*lbf)


Hide 16681A 7.INSTALL RADIATOR UPPER AIR GUIDE PLATE (w/o NO. 1 Radiator to Support Seal)

Hide 53510 8.INSTALL HOOD LOCK ASSEMBLY (w/o NO. 1 Radiator to Support Seal)

Hide 17750A 9.INSTALL INLET AIR CLEANER ASSEMBLY (for Gasoline Model, w/o NO. 1 Radiator to Support Seal)

Hide 86790 10.ADJUST FRONT TELEVISION CAMERA ASSEMBLY (w/ Panoramic View Monitor System, w/ NO. 1 Radiator to Support Seal)

Hide 11.PERFORM CALIBRATION (w/ Parking Support Brake System, w/ NO. 1 Radiator to Support Seal)

Hide 53301 12.INSPECT HOOD SUB-ASSEMBLY